市場調查報告書
商品編碼
1403416
到 2030 年雷射消熔表面清潔設備市場預測:按產品類型、應用、最終用戶和地區分類的全球分析Laser Ablation Surface Cleaning Equipment Market Forecasts to 2030 - Global Analysis By Product Type (Pulsed Laser Ablation, Dry Laser Ablation, Wet Laser Ablation, Fiber Laser Cleaning and Other Product Types), Application, End User and By Geography |
根據 Stratistics MRC 的數據,預測期內雷射消熔表面清潔設備的全球市場將以 15.6% 的複合年成長率成長。
使用雷射去除雜質、殘留物和不需要的材料的表面清潔設備被稱為雷射消熔表面清潔設備。高強度雷射光束聚焦在表面上,以去除、溶解或蒸發不需要的材料,而不會損壞下面的材料。透過將雷射光束聚焦在表面上,雜質可以與雷射光束相互作用並發生分解或蒸發。
根據 IEA 的數據,到 2022 年,全球將有約 2,590 萬輛電動車運作。同年純電動車約佔插電式電動車的69.5%。
清洗技術的精度和有效性對於電子、航太、汽車和醫療保健等行業至關重要。雷射消熔可去除雜質,從而提供高精度,且不會危及精緻的表面。雷射消熔可以精確去除雜質、氧化物、塗層或不需要的材料,而不會損壞下面的基板。它是非接觸式的,可以保護敏感表面。
直接暴露於雷射光束會導致皮膚燒燙傷和嚴重的眼睛受傷。護目鏡和手套只是操作員及其附近人員所需的一些適當的安全設備。一些雷射消熔的材料會釋放出有害顆粒和蒸氣,對呼吸系統健康構成威脅。有效的過濾和通風系統對於減少這些危害至關重要。
隨著公司走向自動化和工業 4.0,對自動清洗程序的需求不斷增加。結合雷射消熔設備可以提高自動化生產線的生產率和效率。由於自動化技術的進步,自動化生產線可以採用雷射清洗設備。這種連接確保了清洗操作的一致性和效率,簡化了清洗過程並減少了體力勞動。
雷射消熔設備的購買和維護費用昂貴。購買設備需要大量的前期投資。它們還需要操作、定期維護和維修方面的專業知識,這會增加整體成本。使用雷射消熔設備需要一定的知識和經驗。這種複雜性可能會導致培訓成本增加和合格人員的缺乏,進而影響營運效率。
與許多其他企業一樣,封鎖、旅行限制和製造設施的關閉擾亂了雷射消熔設備生產和分銷的供應鏈。結果,難以滿足需求,導致零件短缺和製造延誤。大流行所做的採購決定可能受到經濟不確定性的影響,這可能影響了雷射消熔表面清潔設備的需求和投資。
預計脈衝雷射消熔細分市場在預測期內將是最大的。脈衝雷射可以瞄準精確區域,同時使鄰近區域不受影響。由於其精度,可以有針對性地去除雜質和層,而不會危及下面的表面。雷射脈衝的強度、長度和頻率都可以由操作員調整,使他們可以自由地根據要清洗的特定材料和污染物客製化清洗程序。
預計汽車業在預測期內複合年成長率最高。自動化生產線採用雷射清洗技術,提高畫質洗均勻度與生產率。即使是配備所有原廠零件且外裝狀況良好的貴重汽車也可以透過雷射清洗來修復。有輕微鏽跡的好車很難買到,尤其是隨著車齡的成長。
預計北美在預測期內將佔據最大的市場佔有率。堅固且可擴展的連接無需經過塗層工藝即可完全塗層,這是雷射清洗機的要求的結果,可保證最佳的焊接前和焊接後後處理。此外,生產技術正在不斷發展以生產高品質的產品,雷射科學正在加強和系統化,越來越多的雷射研究人員和工程師正在努力正確使用雷射。
預計亞太地區在預測期內將維持最高的複合年成長率。這是由於擴大採用雷射技術進行表面清潔,特別是在航太、航空航太、電子和醫療保健等行業。此外,政府促進製造活動和研發投資的措施正在進一步推動該地區的雷射消熔表面清潔設備市場。
According to Stratistics MRC, the Global Laser Ablation Surface Cleaning Equipment Market is growing at a CAGR of 15.6% during the forecast period. Surface cleaning equipment that uses lasers to remove impurities, residues, or undesired materials is known as laser ablation surface cleaning equipment. In order to eliminate, dissolve, or evaporate the undesirable materials without harming the underlying material, high-intensity laser beams are focused at the surface. By concentrating the laser beam on the surface, the impurities are able to interact with it and undergo breakdown or vaporization.
According to IEA, roughly 25.9 million electric vehicles were operating worldwide in 2022. All-electric cars accounted for about 69.5% of plug-in electric vehicles that year.
Precision and effectiveness in cleaning techniques are essential in industries including electronics, aerospace, automotive, and healthcare. High accuracy is provided by laser ablation, which eliminates impurities without endangering delicate surfaces. They make it possible to remove impurities, oxides, coatings, or undesirable material precisely without causing harm to the substrate underneath. Its non-contact nature shields fragile surfaces from harm
Burns to the skin or serious eye injury can result from direct laser beam exposure. Goggles and gloves are only a couple of the appropriate safety equipment that operators and those nearby need. Certain materials that undergo laser ablation may release harmful particles or vapors that might endanger respiratory health. To reduce these dangers, effective filtration and ventilation systems are essential.
Automatic cleaning procedures are becoming more and more in demand as companies transition to automation and Industry 4.0. The productivity and efficiency of automated production lines can be increased by integrating laser ablation devices. Automated manufacturing lines can incorporate laser cleaning equipment because to technological advancements in automation. This connection guarantees consistency and efficiency in cleaning duties while streamlining the cleaning process and lowering manual labor.
Equipment for laser ablation is costly to buy and maintain. Buying the equipment requires a large upfront expenditure. In addition, the cost of specialist knowledge for operation, regular maintenance, and repairs might raise the entire costs. Utilizing laser ablation equipment necessitates certain knowledge and experience. This complexity lead to higher training costs and a limited pool of qualified personnel, which could affect operational efficiency.
Lockdowns, travel restrictions, and manufacturing facility closures caused interruptions to the supply chain for the production and distribution of laser ablation equipment, as they do in many other businesses. This resulted in difficulties satisfying demand, shortages of components, and manufacturing delays. Purchase decisions made during the pandemic may have been impacted by economic uncertainty, which might have had an impact on demand and investment in laser ablation surface cleaning equipment.
The pulsed laser ablation segment is expected to be the largest during the forecast period. Pulsed lasers are able to target exact regions while leaving neighboring areas unaffected. Because of its accuracy, impurities or layers may be removed in a targeted manner without endangering the surface underneath. The laser pulses' strength, length, and frequency may all be adjusted by operators, giving them the freedom to tailor the cleaning procedure to the specific material and pollutants being cleaned.
The automotive segment is expected to have the highest CAGR during the forecast period. Automated production lines use laser cleaning technologies to improve cleaning uniformity and productivity. A valuable car with all of its original parts and good external condition may be restored with laser cleaning. Excellent vehicles with light rust are hard to come by, especially as they get older.
North America is projected to hold the largest market share during the forecast period. A robust and expanding connection that may be adequately coated without undergoing any coating processes is the outcome of laser cleaning machines' requirement to guarantee the best prewelding and postwelding treatment. In addition, production technology for producing high-quality products, laser science for enhancement and systematization, and a growth in the number of laser researchers and engineers are all being developed in order to properly use lasers.
Asia Pacific is projected to hold the highest CAGR over the forecast period. The escalating adoption of laser technology for surface cleaning purposes, particularly in industries like automotive, aerospace, electronics, and healthcare, has been a major contributing factor. Moreover, government initiatives promoting manufacturing activities, coupled with investments in research and development, have further propelled the market for laser ablation surface cleaning equipment in the region.
Some of the key players in Laser Ablation Surface Cleaning Equipment market include Coherent, Clean LASER, Laser Photonics Corp., AdlOptica, IPG Photonics, Clean Lasersysteme, Quantel Laser, Trumpf, P-Laser, Farley Laserlab, Worldtek, Shengtong Intelligent, Bowei Laser, Xihao Laser and Shenzhen Hydrolaser Technology.
In April 2022, Laser Photonics Corp., a provider of high-tech laser systems for laser cleaning, announced the upgrades to the existing product line. Advancements are being made to the entire product line, which includes everything from Class IV to Class I laser blaster cabinets, automatic laser cleaning equipment, and robotic applications. Also, in May 2022, Laser Photonics Corp. announced the launch of the CleanTech3000-CTH laser cleaning system (3KW).
In March 2022, IPG Photonics constantly upgraded its laser cleaning portfolio; the company launched LightWELDXR, the third product offering within its handheld laser welding and cleaning product line. The new product provides an extended range of handheld laser welding and cleaning capabilities to address more materials and thicknesses than previous LightWELDmodels.