聚異丁烯 (PIB) 市場 - 增長、趨勢、COVID-19 影響和預測 (2023-2028)

在預測期內，聚異丁烯 (PIB) 市場預計將以 5% 左右的複合年增長率增長。

市場增長的主要驅動力是粘合劑和密封劑行業不斷增長的需求。 另一方面，聚異丁烯的抗紫外線不穩定性和 COVID-19 爆發造成的不利條件阻礙了市場增長。

主要亮點

• 聚異丁烯作為皮革製造填料中羊毛脂肪的替代品，有望為市場增長提供各種機會。
• 粘合劑和密封劑以及潤滑劑行業在預測期內將成為需求方面的主導部分。
• 亞太地區主導著全球市場，其中中國、日本、韓國和印度等國家/地區的消費量最大。

聚異丁烯市場趨勢

粘合劑和密封劑行業的需求增加

• 在預測期內，粘合劑和密封劑行業預計將以 5% 左右的複合年增長率增長。 聚異丁烯在粘合劑和密封劑行業的主要用途是接縫密封、電氣線路密封和保護以及體腔防潮。 聚異丁烯以壓敏膠和熱熔膠的形式用於粘合劑體系，由於其粘性、柔韌性和低內聚力，主要用於PSA和熱熔膠。
• 預計亞太地區住房建設的增長將成為壓敏膠和熱熔膠的推動因素。 聚異丁烯密封膠用於防潮、橡膠屋頂修復和屋頂膜維護。
• 2020 年，印度、中國和美國等主要國家/地區的住宅建築增長率預計分別為 9%、4% 和 3%。 因此，預計消費國的粘合劑和密封劑行業對聚異丁烯的需求將增加。
• 在預測期內，粘合劑和密封劑行業預計將主導全球聚異丁烯市場。

預計亞太地區將主導市場

• 預計在預測期內，亞太地區將主導聚異丁烯市場。 該地區主導著輪胎內胎、粘合劑和密封劑、潤滑劑、增塑劑、燃料添加劑和電絕緣等應用市場。
• 聚異丁烯廣泛用於潤滑油，以將潤滑油的粘度調節/提高至所需的最終粘度。 由於可燃性降低、齒輪磨損減少和使用壽命延長等改進的性能，潤滑油市場目前正在推動對高性能潤滑油的需求增加。
• 將聚異丁烯添加到燃料中以改善其粘彈性。 聚異丁烯的衍生物用作無灰分散劑（如 PIBSA），以最大限度地減少沉積物並防止油稠化和油泥形成。 實施嚴格的環境法規和提高消費者意識也將推動該地區的市場。 亞太地區燃料添加劑市場預計將以 5% 左右的複合年增長率顯著增長。
• 因此，預計上述聚異丁烯應用需求的增加將推動亞太地區的市場增長。

聚異丁烯市場競爭者分析

聚異丁烯 (PIB) 市場是一個分散的市場，既有國際參與者，也有國內參與者。 領先的公司包括 BASF SE、Braskem、Dowpol Corporation、TPC Group 和 The Lubrizol Corporation。

其他好處

• Excel 格式的市場預測 (ME) 表
• 三個月的分析師支持

內容

第一章介紹

• 調查先決條件
• 調查範圍

第二章研究方法論

第 3 章執行摘要

第四章市場動態

• 司機
  • 粘合劑和密封劑的需求增加
  • 其他司機
• 約束因素
  • 抗紫外線能力差的聚異丁烯不穩定
  • 由於 COVID-19 爆發導致的不利情況
• 工業價值鏈分析
• 波特的五力分析
  • 供應商的議價能力
  • 買家的議價能力
  • 新進入者的威脅
  • 替代品的威脅
  • 競爭程度

第 5 章市場細分

• 用法
  • 內胎
  • 粘合劑和密封劑
  • 潤滑劑
  • 增塑劑
  • 燃料添加劑
  • 電氣絕緣
  • 其他用途
• 按地區
  • 亞太地區
    • 中國
    • 印度
    • 日本
    • 韓國
    • 其他亞太地區
  • 北美
    • 美國
    • 墨西哥
    • 加拿大
  • 歐洲
    • 德國
    • 英國
    • 意大利
    • 法國
    • 其他歐洲
  • 南美洲
    • 巴西
    • 阿根廷
    • 其他南美洲
  • 中東
    • 沙特阿拉伯
    • 南非
    • 其他中東地區

第六章競爭格局

• 併購、合資企業、聯合研究、合同
• 市場份額 (%)/排名分析
• 主要參與者採用的策略
• 公司簡介
  • BASF SE
  • Braskem
  • Dowpol Corporation
  • Exxon Mobil Corporation
  • JXTG Nippon Oil & Energy Corporation
  • Kemipex
  • The Lubrizol Corporation
  • TPC Group
  • SABIC
  • Shandong Hongrui New Material Technology Co. Ltd
  • Zhejiang Shunda New Material Co. Ltd

第七章市場機會與未來趨勢

• 聚異丁烯作為皮革製造填充物中羊毛脂肪的替代品
• 其他機會

The market for Polyisobutylene (PIB), is expected to witness a CAGR of about 5% during the forecast period. The major factor driving the market studied is increasing demand from the adhesives and sealants industry. On the flipside, instability of polyisobutylene being non-UV resistant and unfavorable conditions arising due to the COVID-19 outbreak, are hindering the growth of the market.

Key Highlights

• Polyisobutylene, as a substitute for wool fat in stuffing agents for the production of leather, is expected to offer various opportunities for the growth of the market.
• Adhesives and sealants and lubricant industries are the dominant segments, in terms of demand, over the forecast period.
• Asia-Pacific region dominates the market globally, with the most substantial consumption from countries like China, Japan, South Korea, and India.

Polyisobutylene Market Trends

Increasing Demand from Adhesives & Sealants Industry Segment

• The adhesive and sealant industry is anticipated to witness a CAGR of approximately 5% during the forecast period. Major applications of the polyisobutylene in the adhesive and sealant industry are to seal joints, to seal and protect electrical wirings, and to protect body cavities from moisture. Polyisobutylene is used in adhesive systems in the form of pressure-sensitive and hot-melt adhesives, and are used due to their tackiness, flexibility, and low cohesive strength, mainly in PSAs and hot-melt adhesives.
• Growth in residential construction in the Asia-Pacific region is expected to act as a driver for pressure sensitive and hot melt adhesives. Polyisobutylene sealant is used for damp proofing, rubber roof repair, and maintenance of roof membranes.
• The residential construction growth rate estimations for 2020 for significant economies like India, China, and the United States are 9%, 4%, and 3%, respectively. This, in turn, is likely to create a demand for polyisobutylene from the adhesive and sealant industry in the consuming countries.
• The adhesives & sealants industry is expected to dominate the global polyisobutylene market over the forecast period.

Asia-Pacific Region to Dominate the Market

• Asia-Pacific is expected to be the dominant market for polyisobutylene during the forecast period. It is because the region dominates the market for applications such as tire tubes, adhesives and sealants, lubricants, plasticizers, fuel additives, and electrical insulation.
• Polyisobutylene is widely used in lubricants for modifying/improving the viscosity of the lubricant formulations to the desired final viscosity. The lubricants market is currently witnessing an increasing demand for high-performance lubricants, owing to their better and improved properties, such as reduced flammability, reduced gear wear, and increased service life.
• Polyisobutylene is added to fuel to improve the viscoelastic property. Derivatives of polyisobutylene are used as ash-less dispersants (such as PIBSA) to minimize deposits and prevent oil thickening and formation of sludge. The implementation of stringent environmental regulations and awareness among consumers in the region will also boost the market. The Asia-Pacific fuel additives market is estimated to witness significant growth, at an estimated CAGR of about 5%.
• Thus, rising demands from the polyisobutylene applications mentioned above are expected to drive the growth of the market in the Asia-Pacific region.

Polyisobutylene Market Competitor Analysis

The polyisobutylene (PIB) market is fragmented with the presence of both international and domestic players in the market. The major companies include BASF SE, Braskem, Dowpol Corporation, TPC Group, and The Lubrizol Corporation, among others.

Additional Benefits:

• The market estimate (ME) sheet in Excel format
• 3 months of analyst support

TABLE OF CONTENTS

1 Introduction

• 1.1 Study Assumptions
• 1.2 Scope of the Study

2 Research Methodology

3 Executive Summary

4 Market Dynamics

• 4.1 Drivers
  • 4.1.1 Increasing Demand from Adhesives and Sealants
  • 4.1.2 Other Drivers
• 4.2 Restraints
  • 4.2.1 Instability of Polyisobutylene being Non-UV Resistant
  • 4.2.2 Unfavorable Conditions Arising due to the COVID-19 Outbreak
• 4.3 Industry Value Chain Analysis
• 4.4 Porter's Five Forces Analysis
  • 4.4.1 Bargaining Power of Suppliers
  • 4.4.2 Bargaining Power of Buyers
  • 4.4.3 Threat of New Entrants
  • 4.4.4 Threat of Substitute Products and Services
  • 4.4.5 Degree of Competition

5 Market Segmentation

• 5.1 Application
  • 5.1.1 Tire Tubes
  • 5.1.2 Adhesive and Sealants
  • 5.1.3 Lubricants
  • 5.1.4 Plasticizers
  • 5.1.5 Fuel Additives
  • 5.1.6 Electrical Insulation
  • 5.1.7 Other Applications
• 5.2 Geography
  • 5.2.1 Asia-Pacific
    • 5.2.1.1 China
    • 5.2.1.2 India
    • 5.2.1.3 Japan
    • 5.2.1.4 South Korea
    • 5.2.1.5 Rest of Asia-Pacific
  • 5.2.2 North America
    • 5.2.2.1 United States
    • 5.2.2.2 Mexico
    • 5.2.2.3 Canada
  • 5.2.3 Europe
    • 5.2.3.1 Germany
    • 5.2.3.2 United Kingdom
    • 5.2.3.3 Italy
    • 5.2.3.4 France
    • 5.2.3.5 Rest of Europe
  • 5.2.4 South America
    • 5.2.4.1 Brazil
    • 5.2.4.2 Argentina
    • 5.2.4.3 Rest of South America
  • 5.2.5 Middle-East
    • 5.2.5.1 Saudi Arabia
    • 5.2.5.2 South Africa
    • 5.2.5.3 Rest of Middle-East

6 Competitive Landscape

• 6.1 Merger and Acquisitions, Joint Ventures, Collaborations, and Agreements
• 6.2 Market Share (%)/Ranking Analysis**
• 6.3 Strategies Adopted by Leading Players
• 6.4 Company Profiles
  • 6.4.1 BASF SE
  • 6.4.2 Braskem
  • 6.4.3 Dowpol Corporation
  • 6.4.4 Exxon Mobil Corporation
  • 6.4.5 JXTG Nippon Oil & Energy Corporation
  • 6.4.6 Kemipex
  • 6.4.7 The Lubrizol Corporation
  • 6.4.8 TPC Group
  • 6.4.9 SABIC
  • 6.4.10 Shandong Hongrui New Material Technology Co. Ltd
  • 6.4.11 Zhejiang Shunda New Material Co. Ltd

7 Market Opportunities and Future Trends

• 7.1 Polyisobutylene as Substitute for Wool Fat in Stuffing Agents for the Production of Leather
• 7.2 Other Opportunities