The future of the composites market looks attractive with opportunities in the transportation, construction, wind energy, pipe & tank, marine, consumer goods, electrical and electronics, aerospace, and others. The composite materials market is expected to reach an estimated $39.4 billion by 2025 and it is expected to decline in 2020 due to global economic recession led by COVID-19. However, market will witness recovery in the year 2021 and it is expected to reach an estimated $77.6 billion by 2025 with a CAGR of 2% to 4% from 2020 to 2025. The major drivers for growth in this market are increasing demand for lightweight materials in the aerospace & defense and automotive industry; corrosion and chemical resistance materials demand in construction and pipe & tank industry; electrical resistivity and high flame retardant materials demand in electrical and electronics industry.
Emerging trends, which have a direct impact on the dynamics of the composites industry, include development of low-cost carbon fibers, high performance glass fiber, and rapid cure resin system.
A total of 238 figures / charts and 38 tables are provided in this 415-page report to help in your business decisions. Sample figures with some insights are shown below. To learn the scope of, benefits, companies researched and other details of this composites report download the report brochure.
Composites material opportunities have evolved through number of stages as presented in figure below:
Evolution of Composites Opportunities
In this market, transportation is the largest end se industry of global composites, whereas glass fiber is largest in fiber type. Growth in various segments of the composites market are given below:
Global Composites Market by Segments
The study includes the market size of composites market and forecast for the composites market through 2025, segmented by application, fiber type, resin type, manufacturing process, molding compound, country, and region, as follows:
- Composites Market by End Use Industry ($ Million and Million Pounds Shipment Analysis from 2014-2025)
- Transportation
- Marine
- Wind Energy
- Aerospace
- Pipe & Tank
- Construction
- Electrical and Electronics
- Consumer Goods
- Others
- Composites Market by Manufacturing Process ($Million and Million Pounds Shipment Analysis from 2014-2025)
- Hand Lay-up
- Spray-up
- Resin Infusion (RRIM, RTM, VARTM)
- Filament Winding
- Pultrusion
- Injection Molding
- Compression Molding
- Prepreg Lay-up
- Other
- Composites Market by Molding Compound ($ Million and Million Pounds)
- SMC
- BMC
- Thermoplastic Compounds ( SFT, LFT, GMT, CFT and Other)
- Composites Market by Resin Type ($ Million and Million Pounds)
- Polyester
- Epoxy
- Vinyl ester
- Phenolic
- Thermoplastics
- Composites Market by Fiber Type ($ Million and Million Pounds Shipment Analysis from 2014-2025)
- Glass fiber
- Carbon fiber
- Aramid fiber
- Composites Market by Fiber Glass Type ($ Million and Million Pounds)
- Single End Roving
- Multi End Roving
- Chopped Strands
- Woven Roving
- Fabrics
- Chopped Strand Mat
- Continuous Filament Mat
- Others
- Composites Market by Carbon Fiber Type ($ Million and Million Pounds)
- PAN Based Carbon Fiber
- PITCH Based Carbon Fiber
- Composites Market by Region ($ Million and Million Pounds Shipment Analysis from 2014-2025)
- North America
- Europe
- Asia Pacific
- ROW
- Composites Market by Country (Million Pounds)
- USA
- Canada
- Mexico
- Germany
- UK
- France
- Italy
- Spain
- Netherland
- China
- India
- Japan
- South Korea
- Brazil
- Russia
- On the basis of its comprehensive research, Lucintel forecasts that the aerospace and wind energy segments are expected to show above average growth during the forecast period from 2020 to 2025.
- Within the composites market, injection molding, hand layup, compression molding, spray up, filament winding, resin infusion, and prepreg layup are some of the major processes utilized to manufacture composite parts. Injection molding is expected to be the largest process in terms of value and volume in composite manufacturing because of low cycle time, low manufacturing cost, and ability to make complex shapes.
- Asia Pacific is expected to remain the largest region by value and volume; this region is also expected to experience the highest growth over the forecast period because of growth in construction, transportation, and the electrical and electronics segments. The major drivers for growth are increasing automotive production, high growth in construction, and infrastructure development.
- Some of the features of this report:
- Market size and growth rates of the composites market.
- Composites and competing material markets (steel, aluminium, plastic, composites) in terms of volume
- Market size estimates of glass fiber and by type of product form.
- Market size estimates of carbon fiber market by tow size as well as by pan and pitch type in terms of volume and value
- Market for fiber type (glass composites, carbon composites, aramid composites).
- Analysis of the composites industry size in terms of value and volume.
- Trends (2014-2019) and forecast (2020-2025) for the composites industry in terms of value and volume by region, such as North America, Europe, Asia Pacific, and ROW
- composites industry trends (2014-2019) and forecast (2020-2025) in terms of value and volume by application, such as Transportation, Marine, Wind energy, Aerospace, Pipe and tank, Construction, Electrical & Electronics, Consumer goods, and Others.
- Market size estimates for reinforcements and resins
- Market size estimates for commodity composites and advanced composites
- Market size estimates of composites by molding compound
- Market breakdown by applications and key regions of North America, Europe, Asia Pacific, and the Rest of the World
- Market size estimates of composites by end product market for 2019 and 2025
- Composites market by country, including China, India, the US, and Germany
- Competitive analysis of steel, aluminum, plastics and the composites industries
- Market breakdown by manufacturing technology, manufacturing process, market segment, and material type
- Thermoset and thermoplastic composites market size
- Market outlook and trends in automotive, marine, construction, aerospace and other important market segments with the needs and challenges of each
- Value chain analysis: Dollar and gross profit flow through various nodes of the value chain (from raw material to final application)
- Company profiles of material and end product manufacturers
- Current innovations in the composites industry
This report answers following 11 key questions:
- Q. 1. What are some of the most promising, high-growth segments in the composites market by application type (transportation, marine, wind energy, aerospace, pipe & tank, construction, electrical & electronics, consumer goods, and others), raw material (glass fiber, carbon fiber, aramid fiber, polyester resin, vinyl ester, phenolic, polyurethane, thermoplastic resin, filler, and others), fiber type (glass fiber composites, carbon fiber composites, and aramid fiber composites), resin type (polyester composites, epoxy composites, vinyl ester composites, phenolic composites, other thermosets, and thermoplastic composites), by molding compound (SMC, BMC, SFT, LFT, and other composites), and region (North America, Europe, APAC, and ROW)?
- Q.2.Which segments will grow at a faster pace and why?
- Q.3.Which region will grow at a faster pace and why?
- Q.4.What are the key factors affecting market dynamics? What are the drivers, challenges, and business risks in this composites market?
- Q.5.What are the business risks and competitive threats in this composites market?
- Q.6.What are the emerging trends in this composites market and the reasons behind them?
- Q.7.What are some of the changing demands of customers in the composites market?
- Q.8.What are the new developments in the composites market? Which companies are leading these developments?
- Q.9. Who are the major players in this composites market? What strategic initiatives are key players pursuing for business growth?
- Q.10.What are some of the competing products in this composites market and how big of a threat do they pose for loss of market share by material or product substitution?
- Q.11.What M & A activity has occurred in the last 5 years in this composites market?
- Report Scope
- Key Features Description
- Base Year for Estimation 2019
- Trend Period
- (Actual Estimates) 2014-2019
- Forecast Period 2020-2025
- Pages 415
- Market Representation / Units Revenue in US $ Billion and Volume in Million Pounds
- Report Coverage Market Trends & Forecasts, Competitor Analysis, New Product Development, Company Expansion, Merger Acquisitions & Joint Venture, and Company Profiling
- Market Segments By application type (transportation, marine, wind energy, aerospace, pipe & tank, construction, electrical & electronics, consumer goods, and others), raw material (glass fiber, carbon fiber, aramid fiber, polyester resin, vinyl ester, phenolic, polyurethane, thermoplastic resin, filler, and others), fiber type (glass fiber composites, carbon fiber composites, and aramid fiber composites), resin type (polyester composites, epoxy composites, vinyl ester composites, phenolic composites, other thermosets, and thermoplastic composites), by molding compound (SMC, BMC, SFT, LFT, and other composites)
- Regional Scope North America, Europe, Asia Pacific, and RoW
- Customization 10% Customization Without any Additional Cost
Table of Contents
1. Executive Summary
2. About the Composites Industry
- 2.1: What is the Composites Industry?
- 2.2: Characteristics of the Composites Industry
3. Competitive Analysis of the Steel, Aluminum, Plastics, and Composites Industries
- 3.1: Competitive Analysis
- 3.2: Plastics Industry Overview
- 3.3: Steel Industry Overview
- 3.4: Aluminum Industry Overview
- 3.5: Composites Industry Overview
4. Reinforcement Market
- 4.1: Functions of Fibers and Resin Materials in Composites
- 4.2: Composites Industry by Fiber Type
- 4.3: Market Size for Reinforcements
- 4.3.1: Glass Fiber Market Size by Product Form
- 4.3.2: Aramid Fiber Market
- 4.4: Market Leaders
- 4.4.1: Glass Fiber Market Leaders
- 4.4.2: Carbon Fiber Market Leaders
- 4.4.3: Aramid Fiber Market Leaders
5. Resin Market
- 5.1: Types of Resin
- 5.1.1: Thermoset Resins for the Composites Industry
- 5.2: Price and Weight Distribution of Various Ingredients in Composites
- 5.2.1: Polyester Resin Applications
- 5.3: Resin Market
6. Composites Industry by Material Type
- 6.1: Advanced Composites Market
- 6.2: Raw Materials Market
- 6.3: Thermoset and Thermoplastic Composites Industry
- 6.4: Thermoplastic Composites Market by Product Form
- 6.4.1: LFRT or LFT (Long Fiber Thermoplastic Composites)
- 6.4.2: GMT
- 6.4.3: Continuous Fiber TPCs
- 6.5: Composites Industry by Molding Compound
7. Composites Industry by Market Segment
- 7.1: Composites Market by Segment
- 7.2: Driving Forces for the Use of Composite Materials
- 7.3: Key Requirements in Various Market Segments
- 7.4: Transportation Industry Market Outlook and Trends
- 7.4.1: Automotive Industry Challenges
- 7.5: Market Outlook and Trends for the Aerospace and Defense Industry
- 7.6: Market Outlook and Trends for the Construction Industry
- 7.6.1: Composites in Bridge Applications
- 7.6.2: Challenges in Bridge Applications
- 7.6.3: Non-Bridge Applications
- 7.7: Pipe and Tank Industry Analysis
- 7.8: Marine Market Outlook and Industry Trends
- 7.9: Consumer Goods Market Outlook and Industry Trends
- 7.10: Electrical and Electronic Industry Outlook
- 7.11: Wind Energy
8. Composites Industry by Manufacturing Process
- 8.1: Composites Industry by Manufacturing Process
9. Trends and Forecast
- 9.1: Industry Challenges in Recent Years
- 9.1.1: Energy Cost Squeeze
- 9.1.2: Challenges of the Glass Fiber Industry
- 9.1.3: Relative Safety
- 9.1.4: Challenge to Fabricators
- 9.2: Trends in the Composites Industry
- 9.2.1: Market Trends by Region
- 9.2.1.1: Market Trends by Application
- 9.3: Trends in North American Composites Industry
- 9.4: Trends in the European Composites Industry
- 9.5: Trends in the Asian Composites Industry
- 9.6: Composites Industry Forecast
- 9.7: Forecast for the North American Composites Industry
- 9.8: Forecast for the European Composites Industry
- 9.9: Forecast for the Asian Composites Industry
- 9.10: Trend and Forecast for Composite Manufacturing Processes
10. Regional Analysis
- 10.1: Composite Shipments by Region
- 10.2: Composite Consumption by Country
- 10.2.1: Shipments in North American Countries
- 10.2.2: Shipments in European Countries
- 10.2.2.1: Shipments in Asia Pacific Countries
- 10.3: Composite Applications by Region
- 10.3.1: Composite Markets in North America
- 10.3.2: Composite Markets in Europe
- 10.3.3: Composite Markets in Asia Pacific
11. Value Chain Analysis and Industry Leaders
- 11.1: Value Chain Analysis
- 11.2: Industry Leaders
- 11.2.1: Industry Leaders in Material Supplier Category
- 11.2.2: Leaders in End Use Markets
12. Material and Technology Needs for the Future Composites Industry
- 12.1: Need for Low-Cost Raw Materials
- 12.2: Resins and Fiber Materials with Higher Strain to Failure
- 12.3: Better UV and Chemical Resistant Materials
- 12.4: Low-Cost Manufacturing Process for Large and Small Parts
- 12.5: Need for High Temperature Composite Materials
- 12.6: Low Shrinkage Materials
- 12.7: Composite Materials with improved Wear and Tear Resistance
- 12.8: Damping and Noise Resistance Materials
- 12.9: Optimal Resin and Additive Systems for Closed Molding Operations
- 12.10: Products Manufacturability and Affordability
- 12.11: Flexible Gelcoats
- 12.12: Flame Resistant Materials
- 12.13: Self-Healing Materials
- 12.14: Manufacturing Process with Lower Processing Time
- 12.15: Flexible Honeycomb Core
- 12.16: Fabric Wrinkling Resistance
- 12.17: Method of Cutting Wet Prepregs
- 12.18: Need for Moisture Resistant Honeycomb Cores
- 12.19: Fast Cure Epoxy Resin
13. Innovations in the Composites Industry
- 13.1: Gurit's Balsaflex Lite for Wind Blades
- 13.2: Gurit's Ampreg 30 Laminating System
- 13.3: Polynt Composites: low-styrene content (lsc) unsaturated polyester resins
- 13.4: Novel Water-Insensitive Curing Systems for Bio-Fiber Reinforced Composites
- 13.5: New High Tensile Carbon Fiber
- 13.6: New Meta-Aramid Fiber
- 13.7: New Composite Toughening System
- 13.8: New Black Para-Aramid Fiber
- 13.9: PulStrand 4100 Roving
- 13.10: New Thermoplastic Textile Prepreg Flame-Retardant, High-Modulus
- 13.11: Novel Nonwovens to Increase Composite Functionality
- 13.12: Advalite - Resins for Composite Applications
- 13.13: Owens Corning's Performax Roving
- 13.14: Johns Manville's ThermoFlow 636, a New Chopped Strand Glass Fiber
- 13.15: Dow Introduced New Polyurethane Series VORAFORCE TW 1100
- 13.16: Cytec Industrial Materials' New Prepreg MTM 23 for Automotive
- 13.17: Momentive's EPIKOTE Binder System 620 for Automotive
- 13.18: New Two Part Epoxy Resin System by Cytec
- 13.19: Cytec Industries' Vinyl Ester Prepreg for Automotive
- 13.20: Hexcel's Epoxy Prepreg HexPly M77
- 13.21: AOC's Low-Density Sheet Molding Compound
- 13.22: PremierUV™-Sheet Molding Compound by The Composite Group
- 13.23: Core Molding Technologies' Airilite™ Ultra-Low-Density SMC
- 13.24: Globe Machine Manufacturing's Second Generation Autoclave Processing Technology
- 13.25: Magnum Venus' Mix Gun Talon-X with Enhanced Features
List of Figures
Chapter 1. Executive Summary
- Figure 1.1: Porter's Five Forces Model for the Composites Industry from the Perspective of Composite Parts Fabricators
Chapter 2. About the Composites Industry
- Figure 2.1: Classification of Raw Materials
- Figure 2.2: Schematic Flow Chart of the Composites Industry
Chapter 3. Competitive Analysis of the Steel, Aluminum, Plastics, and Composites Industries
- Figure 3.1: Shipments - Competing Materials (2003-2019)
- Figure 3.2: Percentage Distribution of Competing Materials in Industries (2019)
- Figure 3.3: North American Domestic Shipments by Material Type (2014-2019)
- Figure 3.4: Percentage Distribution of Competing Materials in North American Industry (2019)
- Figure 3.5: Steel, Aluminum, Plastic, and Composite Shipments on by Weight for the North American Industry (2019)
- Figure 3.6 Heatmap of the Composite Materials Market (2019)
- Figure 3.7: Trends of Plastic Shipments (B lbs.) (2014-2019)
- Figure 3.8: Trend of Steel Shipment (2014-2019)
- Figure 3.9: Steel Industry Breakdown by Major Segment (2019)
- Figure 3.10: Trends of Primary Aluminum Shipment (2014- 2019)
- Figure 3.11: Aluminum Shipments by Market (2019)
Chapter 4. Reinforcement Market
- Figure 4.1: Composite Shipments (%) by Fiber Type (2019)
- Figure 4.2: Composite Shipments by Fiber Type (2019)
- Figure 4.3: Reinforcement Distribution by Fiber Type (2019)
- Figure 4.4: Reinforcement Distribution (M lbs.) by Fiber Type (2019)
- Figure 4.5: Reinforcement Distribution by Fiber Type (%) (2019)
- Figure 4.6: Reinforcement Distribution ($M) by Fiber Type (2019)
- Figure 4.7: Composites Applications by Reinforcement Form
- Figure 4.8: Fiberglass Distribution by Type of Product Form (2019)
- Figure 4.9: Fiberglass Shipments (Mlbs.) by Type of Product Form (2019)
- Figure 4.10: Carbon Fiber Shipments by Precursor Type (2019)
- Figure 4.11: Carbon Fiber Shipments by Precursor Type (2019)
- Figure 4.12: Carbon Fiber Shipments by Tow Size (M lbs.) (2019)
- Figure 4.13: Trends of Shipments in the Carbon Fiber Market (M lbs.) (2014-2019)
- Figure 4.14: Trends of Shipments of the Carbon Fiber Market in $M (2014-2019)
Chapter 5. Resin Market
- Figure 5.1: Schematic Representation of Uncured Polyester Resin
- Figure 5.2: Schematic Representation of Cured Polyester Resin
- Figure 5.3: Schematic Representation of Uncured Vinyl Ester Resin
- Figure 5.4: Schematic Representation of Cured Vinyl Ester Resin
- Figure 5.5: Composites Market Distribution (M lbs.) by Thermoset and Thermoplastic Resin Composites in 2019
- Figure 5.6: Composites Market Distribution (M lbs.) by Resin Type (2019)
- Figure 5.7: Composites Market Distribution ($M) by Resin Type (2019)
- Figure 5.8: Composite Market Distribution by Composite Type (2019)
- Figure 5.9 Composites Market by Composite Type (2019)
- Figure 5.10: Composite Shipments by Resin Type (2019)
- Figure 5.11: Shipments (M lbs.) in the Composites Industry by Resin Type (2019)
- Figure 5.12: Shipments in the Composites Industry ($M) by Resin Type (2019)
Chapter 6. Composites Industry by Material Type
- Figure 6.1: Market Share by Composite Type in the Composites Industry (2019)
- Figure 6.2: Distribution (M lbs.) by Composite Type in the Composites Industry (2019)
- Figure 6.3: Market Share by Composite Type ($M) in the Composites Industry (2019)
- Figure 6.4: Composites Type Distribution ($M) in the Composites Industry (2019)
- Figure 6.5: Raw Material Shipment (M lbs.) in the Composites Industry in 2019
- Figure 6.6: Composites Market Breakdown (M lbs.) by Raw Material Used (2019)
- Figure 6.7: Raw Material Shipment ($M) in the Composites Industry (2019)
- Figure 6.8: Raw Material Distribution in the Composites Industry ($M) (2019)
- Figure 6.9: Composite Market Distribution by Resin Type (2019)
- Figure 6.10: Composite Market Shipments (M lbs.) by Resin Type (2019)
- Figure 6.11: Composite Market Distribution by Resin Type (2019)
- Figure 6.12: Thermoplastic Composites Breakdown by Product Form (2019)
- Figure 6.13: Thermoplastic Composite Shipments (M lbs.) by Product Form (2019)
- Figure 6.14: Thermoplastic Composites Breakdown ($M) by Product Form (2019) Figure 6.15: Thermoplastic Composite Shipments ($M) by Product Form (2019)
- Figure 6.16: Molding Compounds in the Composites Industry (2019)
- Figure 6.17: Molding Compound Shipments (M lbs.) in the Composites Industry (2019)
Chapter 7. Composites Industry by Market Segment
- Figure 7.1: Major OEMs/Molders in Various Market Segments
- Figure 7.2: Composite Distribution (M lbs.) by Market Segment (2019)
- Figure 7.3: Composite Shipments by Market Segment (2019)
- Figure 7.4: Composite Distribution by Market Segment (2019)
- Figure 7.5: Composite Shipments ($M) by Market Segment (2019)
- Figure 7.6: Composites Industry by Region (2019)
- Figure 7.7: Composite Shipments (M lbs.) by Region (2019)
- Figure 7.9: Composite Distribution in the Transportation Industry (2019)
- Figure 7.10: Composite Shipments (M lbs.) in the Transportation Industry (2019)
- Figure 7.11: Composites in Transportation Market by Region (2019)
- Figure 7.12: Composite Shipments in the Transportation Market by Region (2019)
- Figure 7.13: Trends of US Light Vehicle Sales from 1991 to 2019 (Million Units)
- Figure 7.14: Trends of US Light Vehicle Sales (Thousand Units) (1991-2019)
- Figure 7.15: Trends in Composite Shipments in the Automotive Market (2014-2019)
- Figure 7.16: Manufacturing Process for the Transportation Industry (2019)
- Figure 7.17: Composite Shipments (M lbs.) by Manufacturing Process for the Transportation Industry (2019)
- Figure 7.19: Composite Distribution in the Aerospace Industry (2019)
- Figure 7.20: Composite Shipments (M lbs.) in the Aerospace Industry (2019)
- Figure 7.21: Composite Distribution by Region in the Aerospace Industry (2019)
- Figure 7.22: Composite Consumption by Region in the Aerospace Industry (2019)
- Figure 7.23: Monthly Production Rate Forecast for Major Commercial Aircraft Platforms
- Figure 7.24: Evolution of Composite Applications in Commercial Aircraft
- Figure 7.25: Material Distributions of Boeing 787
- Figure 7.26: Material Distribution in the Airbus A340 for Buy and Fly Cases
- Figure 7.27: Trends of Shipments in the Aerospace Market ($B) (2014-2019)
- Figure 7.28: Trends of Delivery (units) by Boeing and Airbus in Commercial Aerospace
- Figure 7.29: Supply and Demand Trends of Boeing Aircraft (2002-2019)
- Figure 7.30: Supply and Demand Trends of Airbus Aircraft (2002-2019)
- Figure 7.31: Composite Distribution in the Construction Industry (2019)
- Figure 7.32: Composite Shipments (M lbs.) in the Construction Industry (2019)
- Figure 7.33: Construction Industry by Region in 2019
- Figure 7.34: Composite Shipments in the Construction Industry by Region (2019)
- Figure 7.35: Trends in Housing Starts in the US (1978-2019)
- Figure 7.36: Trends in Annual New Home Average Prices in the US
- Figure 7.37: Construction Activity in the EU (27) (2000-2019) (Source: Eurostat)
- Figure 7.38: Trends of Deficient Bridges in US (2008-2019)
- Figure 7.39: Corrosion Market Breakdown by Type of Application
- Figure 7.40: Petroleum Tank Shipments by Material Type in North America
- Figure 7.41: Percent Comparison of Septic Tank Shipments (in Terms of Number) by Construction Material
- Figure 7.42: Percentage Distribution of Sewage Pipe Market by Type of Material
- Figure 7.43: Oil and Gas Pipe Market by Type of Material
- Figure 7.44: Composite Distribution in Pipe and Tank Industry (2019)
- Figure 7.45: Composite Shipments (M lbs.) in the Pipe and Tank Industry (2019)
- Figure 7.46: Composite Shipments (M lbs.) in the Pipe and Tank Industry by Region (2019)
- Figure 7.47: Composite Shipments in the Pipe and Tank Industry by Region (2019)
- Figure 7.48: Composites in the Marine Industry (2019)
- Figure 7.49: Composite Shipments in the Marine Industry (2019)
- Figure 7.50: Composite Materials Distribution by Region in the Marine Industry (2019)
- Figure 7.51: Composite Shipments by Region in the Marine Industry (2019)
- Figure 7.52: Trends for the US Boat Shipment (1991-2019)
- Figure 7.53: Trends for the US Personal Watercraft (PWC) Market (2001-2019)
- Figure 7.54: Trends in Regional Shipments of Composites in the Marine Industry (2014-2019)
- Figure 7.55: Composite Distribution in the Consumer Goods Market (2019)
- Figure 7.56: Composite Shipments in the Consumer Goods Industry (2019)
- Figure 7.57: Composite Shipments in the Consumer Market by Region (2019)
- Figure 7.58: Composite Shipments (M lbs.) by Region in the Consumer Goods Industry (2019)
- Figure 7.59: Composites in the Electrical/Electronic Industry (2019)
- Figure 7.60: Composite Shipments in the Electrical/Electronic Industry (2019)
- Figure 7.61: Composite Shipments by in the Electrical/Electronic Market by Region (2019)
- Figure 7.62: Composite Shipments in the Electrical/Electronics Market by Region (2019)
- Figure 7.63: PCB Trends and Forecast Market (2010- 2025)
- Figure 7.64: Composites in the Wind Energy Industry (2019)
- Figure 7.65: Composite Shipments (M lbs.) in the Wind Energy Industry (2019)
- Figure 7.66: Composite Shipments in the Wind Energy Market by Region (2019)Figure 7.67: Trends in Composite Shipments in the Wind Energy Market (2014-2019)
- Figure 7.68: Composite Shipments in the Wind Energy Market by Region (2019)
- Figure 7.69: Cumulative Installations in the Wind Energy Market (2000-2019)
Chapter 8. Composites Industry by Manufacturing Process
- Figure 8.1: Classification of Composite Processing Techniques
- Figure 8.2: Composite Distribution by Manufacturing Process (2019)
- Figure 8.3: Composite Shipments (M Ibs) by Manufacturing Process (2019)
- Figure 8.4: Composite Distribution by Manufacturing Process in 2019(2019)
- Figure 8.5: Composite Shipments ($M) by Manufacturing Process (2019)
- Figure 8.6: Hand Lay-Up and Spray-Up Distribution by Market in the Composites Industry (2019)
- Figure 8.7: Hand Lay-Up and Spray-Up Distribution (M lbs.) by Market in the Composites Industry (2019)
- Figure 8.8: Compression Molding Distribution by Market in the Composites Industry (2019)
- Figure 8.9: Compression Molding Shipment (M lbs.) by Market in the Composites Industry (2019)
- Figure 8.10: Pultrusion Process Distribution by Market in the Composites Industry (2019)
- Figure 8.11: Pultrusion Process Distribution (M Ibs) by Market in the Composites Industry (2019)
- Figure 8.12: Open and Closed Molding Distribution in the Composites Industry (2019)
- Figure 8.13: Open and Closed Molding Shipment (M lbs.) in the Composites Industry (2019)
Chapter 9. Trends and Forecast
- Figure 9.1: Trends in the Composites Industry (2014-2019)
- Figure 9.2: Comparative Regional Growth Rates in Composites Industry in 2014 and 2019
- Figure 9.3: Trends in Wind Energy Capacity Installations
- Figure 9.4: Trends of the US Personal Watercraft Market (2014-2019)
- Figure 9.5: Trends in the Composites Industry (M lbs.) (2014-2019)
- Figure 9.6: Composites Industry (M lbs.) by Region (2014)
- Figure 9.7: Composites Industry (M lbs.) by Region (2019)
- Figure 9.8: Composites Industry ($M) by Region (2019)
- Figure 9.9: Composites Industry by Region (M lbs.) (2014-2019)
- Figure 9.10: Growth Rates in Various Market Segments of the Composites Industry (2019)
- Figure 9.11: Average Annual Growth Rates in Various Market Segments of the Composites Industry (2014-2019)
- Figure 9.12: North American Composite Shipments (M lbs.) (2014-2019)
- Figure 9.13: Growth Rates in Various Market Segments of the North American Composites Industry (2019)
- Figure 9.14: Average Annual Growth Rates in Various Market Segments of the North American Composites Industry (2014-2019)
- Figure 9.15: US Composite Shipment Trends by Market Segment (1914-2019)
- Figure 9.16: Trends in the European Composite Shipments (M lbs.) (2014-2019)
- Figure 9.17: Growth Rate in Various Market Segments of the European Composites Market (2019)
- Figure 9.18: Average Annual Growth Rates in Various Market Segments of the European Composites Industry (2014-2019)
- Figure 9.19: Europe Composite Shipment Trends by Market Segment (2014-2019)
- Figure 9.20: Trends in the APAC Composite Shipments (M lbs.) (2014- 2019)
- Figure 9.21: Growth Rate in Different Market Segments in the APAC Composites Industry (2019)
Figure 9.22: Average Annual Growth Rates in Various Market Segments of the Asia Pacific Composites Industry (2014-2019)
Figure 9.23: Comparative Composite Shipments (M lbs.) in Different Market Segments (2019)
Figure 9.24: Comparative Composite Shipments (M lbs.) in Different Market Segment by Region (2019)
Figure 9.26: US Consumer Spending by Year (1996-2019)
Figure 9.27: US Quarterly Consumer Sentiment for 2014-2019 (Figure 9.28: Trends in the US GDP (2014-2019)
Figure 9.29: Trend of the Regional GDP Growth Rate
Figure 9.30: Forecast of the Composites Industry (2020-2025)
Figure 9.31: Composites Market Forecast by Region (M lbs.) (2020-2025)
Figure 9.32: Composite Shipments (M lbs.) by Region (2025)
Figure 9.33: Composites Market ($M) by Region (2025)
Figure 9.34: Composites Market ($M) by Region (2025)
Figure 9.35: Growth Opportunities in Various Market Segments (2020-2025)
Figure 9.36: Composites End Product Market Forecast by Application Segment
Figure 9.37: Growth Forecast in the Composite Shipments by Market Segment (2020)
Figure 9.38: Average Annual Growth Forecast in Various Market Segments of the Composites Industry (2020-2025)
Figure 9.39: Composite Distribution by Market Segment (2020)
Figure 9.40: Composite Distribution by Market Segments (2025)
Figure 9.41: Composite Shipments ($M) by Market Segment (2025)
Figure 9.42: Growth Forecast in the North American Composite Shipments by Market Segment (2020)
Figure 9.43: Average Annual Growth Forecast in Various Market Segments of the North American Composites Industry (2020-2025)
Figure 9.44: Composite Distribution by Application in North America (2020)
Figure 9.45: Composite Distribution by Application in the North American Market (2025)
Figure 9.46: North American Composite Shipments ($M) by Market Segment (2025)
Figure 9.47: Growth Rate in Various Market Segments of the European Composites Market (2020)
Figure 9.48: Annual Growth Rates in the Various Market Segments of the European Composites Industry (2020-2025)
Figure 9.49: Composite Distribution by Application in the European Market (2020)
Figure 9.50: Composite Distribution by Application in the European Market (2025)
Figure 9.51: European Composite Shipments ($M) by Market Segment (2025)
Figure 9.52: Growth Rate in Different Market Segments in the APAC Composites Industry (2020)
Figure 9.53: Average Annual Growth Forecast in Various Market Segments of the Asia Pacific Composites Industry (2020-2025)
Figure 9.54: Composite Distribution by Application in the Asia Pacific (M lbs.) by Market Segment (2020)
Figure 9.55: Composite Distribution by Application in the Asia Pacific Market (2025)
Figure 9.56: Composite Shipments ($M) by Application in the APAC Composites Market (2025)
Figure 9.57: Open and Closed Molding Shipment of the Composites Industry(2019)
Figure 9.58: Open and Closed Molding Distribution of the Composites Industry (2025)
Figure 9.59: Open and Closed Molding Shipment of the Composites Industry (2025)
Figure 9.60: Composite Distribution of Manufacturing Process (2025)
Figure 9.61: Composite Shipments (M Ibs) by Manufacturing Process (2025)
Figure 9.62: Composite Distribution of Manufacturing Process by End Product Market (2025)
Figure 9.63: Composite Shipments ($M) by Manufacturing Process (2025)
Chapter 10. Regional Analysis
- Figure 10.1: The Composites Industry by Region (2019)
- Figure 10.2: Composites Industry Shipments by Region (2019)
- Figure 10.3: Regional Market (M lbs.) in the Composites Industry: 2014 vs. 2019
- Figure 10.4: Comparative Composite Shipments (M lbs.) in Different Market Segments by Region (2019)
- Figure 10.5: Composite Shipment Distribution of Top 12 Leading Countries (2019)
- Figure 10.6: Composite Shipments (M Ibs) of Top 12 Leading Countries of the World (2019)
- Figure 10.7: Composites (M Ibs.) Per Capita of Top 12 Leading Countries of the World (2019)
- Figure 10.8: Composites Potential for Top 12 Leading Countries of the World (2019)
- Figure 10.9: Composite Distribution by North American Countries (2019)
- Figure 10.10: Composite Shipments (M Ibs.) in North American Country (2019)
- Figure 10.11: Composite Shipments Distribution in European Countries (2019)
- Figure 10.12: Composite Shipments in European Countries (2019)
- Figure 10.13: Composites (Pounds) Per Capita in European Countries (2019)
- Figure 10.14: Composite Shipments Distribution in Asia Pacific Countries (2019)
- Figure 10.15: Composite Shipments in Asia Pacific Countries (2019)
- Figure 10.16: Composites (Ibs.) per Capita in Asia Pacific Countries (2019)
- Figure 10.17: Composites Market Distribution by Application in North America (2019)
- Figure 10.18: Composite Shipments (M lbs.) in Various Applications in North America (2019)
- Figure 10.19: Composite Shipments ($M) in Various Applications in North America (2019)
- Figure 10.20: European Composite Distribution by Market Segment (2019)
- Figure 10.21: Composite Shipments (M Ibs) in Various Applications in Europe (2019)
- Figure 10.22: Composite Shipments ($M) in Various Applications in Europe (2019)
- Figure 10.23: Composite Distribution by Application in the Asia Pacific Market (2019)
- Figure 10.24: Composite Shipments (M lbs.) in Various Applications in Asia Pacific Market in (2019)
- Figure 10.25: Composite Shipments ($M) in Various Applications in the Asia Pacific Market (2019)
Chapter 11. Value Chain Analysis and Industry Leaders
- Figure 11.1: Value Chain for the Composites Industry
- Figure 11.2: Composites Industry Breakdown (M lbs.) by Raw Material Used (2019)
- Figure 11.3: Raw Material (M lbs.) Shipments in the Composites Industry (2019)
- Figure 11.4: Raw Materials ($M) Shipments in Composites Industry (2019)
- Figure 11.5: Dollar ($) and Gross Profit Flow Chart Through Various Nodes of the Value Chain from Raw Materials to the End Products (2019)
- Figure 11.6: Gross Profit ($M) in Raw Material (Reinforcement and Resins) Market (2019)
- Figure 11.7: Gross Profit Distribution (%) by Type of Raw Material (2019)
- Figure 11.8: Market Distribution (%) by Value ($) of the End Product
- Figure 11.9: Composites Market Distribution by Value of End Product (2019)
- Figure 11.10: Gross Profit ($M) in Various Market Segments
- Figure 11.11: Gross Profit Distribution (%) by Type of Market Segment
List of Tables
Chapter 1. Executive Summary
- Table 1.1: Composites Market Parameters and Attributes - Material Perspective
- Table 1.2: Composites Market Parameters and Attributes - End Product Market Perspective
Chapter 3. Competitive Analysis of the Steel, Aluminum, Plastics, and Composites Industries
- Table 3.1: Penetration of Composites in Various Markets
Chapter 6. Composites Industry by Material Type
- Table 6.1: Composite Shipments by Raw Material Type (2019)
Chapter 7. Composites Industry by Market Segment
- Table 7.1: Impact Properties of Selected Materials
- Table 7.2: Applications of Composite Materials in the Automotive Industry
- Table 7.3: Emerging Automotive Applications for Composite Materials
- Table 7.4: Strategies of OEMs and Tier1 Suppliers for Vertical Integration in High Volume Automotive Composites
- Table 7.4: Segmented US Light Vehicle Sales (in thousands of units)
- Table 7.5 Applications of Composite Materials in Aerospace Structures
- Table 7.6: Evolution of Composite Material Applications at Airbus
- Table 7.7 Composite Applications of Various Models of Boeing and Airbus Airplanes
- Table 7.8 Aerospace Structures Made of Composites
- Table 7.9: Selected Materials and Processes for the Airbus A380
- Table 7.10 Composite Components in Aircraft Applications
- Table 7.11: Structural Fabric Repair System
Chapter 8. Composites Industry by Manufacturing Process
- Table 8.1: Ranking of Manufacturing Process Based on Annual Shipment
Chapter 9. Trends and Forecast
- Table 9.1: Market Trends for Composite Shipments (2014-2019)
- Table 9.2: Average Annual Growth Rates in Various Regions of the Composites Industry
- Table 9.3: Market Size and Annual Growth Rates in Various Segments of the Composites Industry
- Table 9.4: Market Size and Annual Growth Rates in Various Market Segments of the Composites Industry (2014-2019)
- Table 9.5: Market Trends in North American Composite Shipments (2014-2019)
- Table 9.6: Average Annual Growth Rates in Various Market Segments of the US Composites Industry (1914-2019)
- Table 9.7: GDP and Unemployment Rate for Leading Countries
- Table 9.8: Interest and Exchange Rates for Leading Countries
- Table 9.9: Forecast for Select Markets
- Table 9.10: Average Annual Growth Forecasts in Various Regions of the Composites Industry (2020-2025)
- Table 9.11: Market Size and Annual Growth Forecasts in Various Market Segments of the Composites Industry (2020-2025)
Chapter 10. Regional Analysis
- Table 10.1: Average Annual Growth Rates in Various Regions of the Composites Industry
- Table 10.2: Ranking of Top 11 Countries of World in Terms of Composite Shipments
- Table 10.3: Ranking of Five Leading Countries in Europe in Terms of Composite Shipments
- Table 10.4: Ranking of Five Leading Countries in Asia Pacific in Terms of Composite Shipments
- Table 10.5: Ranking of Five Leading Applications in the North American Composites Industry
- Table 10.6: Ranking of Six Leading Market Segments in the European Composites Industry
- Table 10.7: Ranking of Five Leading Applications in APAC
Chapter 11. Value Chain Analysis and Industry Leaders
- Table 11.1: Financial Results of Industry Leaders in the Material Supplier Category
- Table 11.2: Financial Results of Industry Leaders in Various Market Segments
Chapter 12. Material and Technology Needs for the Future Composites Industry
- Table 12.1: Impact Properties of Selected Materials
- Table 12.2: Maximum Continuous Use Temperatures for Various Thermosets and Thermoplastics