|
市場調查報告書
全球的纖維機械市場 Part 1 紗線製造：2010年6月版
World Markets for Textile Machinery: Part 1--Yarn Manufacture, June 2010 edition
|
全球的纖維機械市場 Part 1 紗線製造：2010年6月版 是由出版商Textiles Intelligence在2010年06月所出版的。
這份英文市場調查報告書包含38 Pages 價格從美金785起跳。
本報告，針對全球纖維機械市場的紗線製造，分析整體動向、以及種類的動向，並提供出貨量(2008・2009年)・累計出貨量(2000-2009年)・區域以及主要國家別的設置容量等的統計，由下列摘要形式闡述。
摘要
整體動向
紡織機械
延伸假撚機
統計的附錄
圖表
Abstract
2009 was another poor year for the international textile yarn machinery
market. Falls were recorded in deliveries of short staple spindles, long
staple spindles, open-end rotors and single heater false-twist draw texturing
machinery. Furthermore, all of the falls were at double digit rates, and in
three cases deliveries fell at double digit rates for the second consecutive
year.
In spinning, shipments of short staple spindles were down by 17% following a
33% decline in 2008, and deliveries of open-end rotors declined by 26% after
plunging by 66% a year earlier. Meanwhile, shipments of long staple spindles
plummeted by 78% following a modest 3.4% drop in 2008.
In draw texturing, shipments of single heater false-twist spindles fell by
45%. This was the third consecutive double digit decline following drops of
20% in 2008 and 37% in 2007. As a result, shipments fell to their lowest level
since records began in 1994. Deliveries of double heater false-twist spindles,
on the other hand, increased by 52%, thereby reversing a 34% decline in the
previous year.
A geographical breakdown shows that there were sharp falls in purchases by the
industries in several individual countries in 2009. In India, for example, the
industry reduced its acquisitions of short staple spindles by 46%, open-end
rotors by 28% and double heater false-twist draw texturing spindles by 7.8%.
At the same time the industry cut its acquisitions of long staple spindles
entirely after being the third largest buyer in 2008. The industry in China,
meanwhile, reduced its purchases of long staple spindles, open-end rotors and
single heater false-twist spindles. Elsewhere, several industries stepped up
their purchases in 2009. For example, the industries in Belarus and Iran
increased their investments in short staple spindles, open-end rotors and
double heater false-twist draw texturing spindles.
Table of Contents
SUMMARY
GENERAL TRENDS
SPINNING MACHINERY
- Short staple spindles
- Long staple spindles
- Open-end rotors
DRAW TEXTURING MACHINERY
- Double heater false-twist draw texturing machinery
- Single heater false-twist draw texturing machinery
STATISTICAL APPENDIX
List of tables
- Table 1: Shipments of short staple spindles by region and leading
countries of destination, 2008 and 2009
- Table 2: Cumulative shipments of spinning machinery by type, region and
leading countries of destination, 2000-09
- Table 3: Installed capacity of short staple spindles by region and leading
countries, 2008 and 2009
- Table 4: Shipments of long staple spindles by region and leading countries
of destination, 2008 and 2009
- Table 5: Installed capacity of long staple spindles a by region and
leading countries, 2008 and 2009
- Table 6: Shipments of open-end rotors by region and leading countries of
destination, 2008 and 2009
- Table 7: Installed capacity of open-end rotors by region and leading
countries, 2008 and 2009
- Table 8: Shipments of false twist spindle draw texturing machinery by type
and by region, 2009
- Table 9: Shipments of double heater false twist spindle draw texturing
machinery by region and leading countries of destination, 2008 and 2009
- Table 10: Cumulative shipments of false twist spindle draw texturing
machinery by type, region and leading countries of destination, 2000-09
- Table 11: Shipments of single heater false twist spindle draw texturing
machinery by region and leading countries of destination, 2008 and 2009
- Table 12: Installed capacity and shipments of spinning machinery by type,
region and selected country, 2000-09
- Table 13: Shipments of false twist spindle draw texturing machinery by
region and leading countries of destination, 2008 and 2009
List of figures
- Figure 1: Shipments of short staple spindles, 1988-2009
- Figure 2: Shipments of long staple spindles, 1988-2009
- Figure 3: Shipments of open-end rotors, 1988-2009
- Figure 4: Cumulative spinning machinery shipments, selected countries,
2000-09
- Figure 5: Cumulative draw texturing machinery shipments, selected
countries, 2000-09
- Figure 6: Shipments of double heater false twist draw texturing machinery,
by region, 1994-2009
|
