美國牙科移植市場：2009年 是由出版商Millennium Research Group在2009年03月所出版的。
這份英文市場調查報告書價格從美金4197起跳。
此報告書在提供美國牙科移植市場概要的同時，還分析了一般尺寸以及小尺寸的牙科移植、最終修補等，內容還包含了今後的預測。報告書之內容摘要如下所示。
摘要
方法論
第1章 牙科移植概要
- 失去牙齒隨之而來的問題
- 以往牙齒的交換
- 牙科移植的適當時期
- 對患者而言牙科移植的好處
- 對牙科醫師而言牙科移植的好處
- 牙科移植處置
- 規定概要
第2章 美國牙科移植市場
- 市場概要
- 市場分析
- 預測期間的經濟假說
- 處置
- 市場預測
- 市場促進要因以及抑制要因
- 競爭分析
第3章 一般尺寸的牙科移植固定市場
- 市場概要
- 市場分析
- 形狀別市場預測
- 表面處理別市場預測
- 種類別市場預測
第4章 最終修補市場
第5章 小尺寸牙科移植固定市場
附錄
圖表
Abstract
The US market for dental implants, which comprises regular© (> 3.0 mm) and
smalldiameter (μ 3.0 mm) dental implant fixtures, final abutments, and other
tools, will achieve strong growth through to 2013.
Methodology
Research Methodology
The following report uses a number of methodologies to gather and present data
and analysis. At the outset, a large survey of secondary sources is conducted.
These sources act as the basis for the primary research stage, which builds
and enhances the quantitative and qualitative attributes of the early research.
Secondary sources include:
- Government Sources:
- Securities and Exchange Commission filings
- Food and Drug Administration and patent filings
- National Center for Health Statistics data
- Dental Implant Companies:
- Annual reports, product brochures, corporate profiles, etc.
- Internal Databases and Reports:
- Previous reports on similar/related sources
- General Internet Searches, Medical Literature, and Newspaper/Magazine
Searches:
- Identifying various centers of specialization and articles that might
provide leads for primary research.
The secondary research stage builds the foundation for the primary research.
The primary research methodology has four steps:
Step 1: The first step involves an impartial scan of all the
information gathered during the secondary research stage to determine its
utility based on the specific requirements of this report. Each piece of
information is, thus, either discarded or marked as high or low priority. It
is then organized appropriately as determined by the structure and sectioning
of the report.
Step 2: At this stage, early assumptions are formed as to the
implications of the information for the various dental implant market
segments. These assumptions are then used to determine hypotheses using both
inductive and deductive approaches. On the quantitative front, these
hypotheses result in full historical and projected market data sets (market
sizes [units and US$] and market shares).
Step 3: At this stage, the research is in position for its most
important primary phase - expert interviews. Throughout the secondary
research, industry and medical experts are identified. These experts are now
contacted by telephone and asked to participate in interviews on recent trends
and developments in the industry.
Interviews are either conducted at the time of the initial call or scheduled
at the convenience of the expert. Interview questions are tailored to the
expertise of the particular interviewee, although in most cases, the most
important questions are asked of all experts. The questions are largely based
on the assumptions and hypotheses developed in Step 2, which are then either
augmented, discarded, or adjusted, based on the views and positions put forth.
Attempts are made, whenever possible, to cross-check the views of various
experts against each other and reach positions of consensus on issues and
market numbers.
Step 4: The final stage of primary research involves individual and
group analysis by Millennium Research Group. All research results are assessed
and cross-checked thoroughly to determine their validity, relevance, and
weight. From this process, qualitative conclusions are reached and data points
finalized.
Forecast Methodology
In addition to Steps 1 through 4 (as outlined above), the following
“bottom-up” methodology was followed in developing forecast assumptions for
this report.
A comprehensive breakdown of various dental implant procedures was prepared
using data from several sources including professional associations,
government statistics, and private research/media sources. Industry experts
and practitioners were consulted to ensure accuracy and verify observed
trends. As a cross-check, total industry revenues available through 10Ks and
other sources were compared against modeled industry revenues.
Using the best estimates of industry experts, practitioners, private
research/media sources, and in-house experts, year-by-year growth rates and
average selling prices were applied individually to each subcategory to derive
forecasts. These estimates were cross-checked by industry experts (marketing
managers, product managers, CEOs, etc.) and further refined.
Overall findings were compared against market and procedure forecasts
published by other sources to ensure reasonable estimates.
Table of Contents
TABLE OF CONTENTS
LIST OF EXHIBITS
EXECUTIVE SUMMARY
METHODOLOGY
1.0 DENTAL IMPLANTS OVERVIEW
- 1.1 Problems Associated with Tooth Loss
- 1.2 Conventional Tooth Replacement
- 1.3 When Is a Dental Implant Appropriate?
- 1.4 Advantages of Dental Implants for Patients
- 1.5 Advantages of Dental Implants for Dental Practitioners
- 1.6 Dental Implant Procedures
- 1.6.1 Reduction of Surgical Stages
- 1.7 Regulatory Overview
2.0 US DENTAL IMPLANT MARKET
- 2.1 Market Overview
- 2.2 Market Analysis
- 2.2.1 Economic Assumptions for the Forecast Period
- 2.2.2 Procedures
- 2.2.3 Market Forecast
- 2.2.3.1 Regular-Diameter Dental Implant Fixture Market
- 2.2.3.2 Final Abutment Market
- 2.2.3.3 Small-Diameter Dental Implant Fixture Market
- 2.2.3.4 Other Tools Market
- 2.2.4 Market Drivers and Limiters
- 2.2.4.1 Market Drivers
- 2.2.4.2 Market Limiters
- 2.3 Competitive Analysis
- 2.3.1 Market Shares
- 2.3.2 Competitor Discussions (in Alphabetical Order)
- Astra Tech
- BIOMET 3i
- Nobel Biocare
- Straumann
- Zimmer Dental
- Other
- 2.3.3 Dental Implant Brand Loyalty
3.0 REGULAR-DIAMETER DENTAL IMPLANT FIXTURE MARKET
- 3.1 Market Overview
- 3.2 Market Analysis
- 3.2.1 Procedures
- 3.2.1.1 Delivery Method: 1-Stage versus 2-Stage
- 3.2.1.2 Loading Technique: Immediate Functional Loading versus
Traditional Loading
- 3.2.1.3 Single- versus Multiunit Placement
- 3.2.1.4 Guided Surgery: Treatment Planning Software and Drilling
Template
- 3.2.2 Market Forecast by Shape
- 3.2.3 Market Forecast by Surface Technology
- 3.2.4 Market Forecast by Type
4.0 FINAL ABUTMENT MARKET
- 4.1 Market Overview
- 4.2 Market Analysis
- 4.2.1 Market Forecast
- 4.2.1.1 Cement-Retained Final Abutment Market
- 4.2.1.2 Custom-Milled Final Abutment Market
- 4.2.1.3 Overdenture Final Abutment Market
- 4.2.1.4 Screw-Retained Final Abutment Market
5.0 SMALL-DIAMETER DENTAL IMPLANT FIXTURE MARKET
- 5.1 Market Overview
- 5.2 Market Analysis
APPENDIX A: MRG ACRONYMS AND INITIALISMS
APPENDIX B: SUPPLEMENTAL EXHIBITS
List of Exhibits
EXECUTIVE SUMMARY
- Exhibit 1: Dental Implant Market, by Segment, US (US$), 2007 - 2013
- Exhibit 2: Regular-Diameter Dental Implant Fixture Units versus
Small-Diameter Dental Implant Fixture Units, US, 2007 - 2013
- Exhibit 3: Final Abutment Market, by Type, as a % of Total, US, 2008 and
2013
- Exhibit 4: Small-Diameter Dental Implant Fixture ASPs, US (US$), 2007 -
2013
- Exhibit 5: Leading Competitors in the Dental Implant Market, US, 2008
CHAPTER 2: US DENTAL IMPLANT MARKET
- Exhibit 6: Dental Implant Market, by Segment, US (US$), 2007 - 2013
(Graphical Format)
- Exhibit 7: Dental Implant Procedures, US, 2007 - 2013
- Exhibit 8: Dental Implant Market, by Segment, US (US$), 2007 - 2013
(Tabular Format)
- Exhibit 9: Dental Implant Market Growth, by Segment, US, 2008 - 2013
- Exhibit 10: Drivers and Limiters of the Dental Implant Market, US
- Exhibit 11: Percentage of GPs Placing Dental Implants, US, 2004 and 2008
- Exhibit 12: Over-65 Population, US, 2007 - 2025
- Exhibit 13: Leading Competitors in the Dental Implant Market, by Segment,
as a % of Total, US, 2008
- Exhibit 14: Relative Importance of Loyalty Drivers in Purchasing
Decisions, US
CHAPTER 3: REGULAR-DIAMETER DENTAL IMPLANT FIXTURE MARKET
- Exhibit 15: Regular-Diameter Dental Implant Fixture Market (US$), 2007 -
2013
- Exhibit 16: Regular-Diameter Dental Implant Fixture Application, by
Delivery Method, Loading Technique, and Single- or Multiunit Placement, as a %
of Total, US, 2007 - 2013
- Exhibit 17: Regular-Diameter Dental Implant Fixture Application, by
Delivery Method, Loading Technique, and Single- or Multiunit Placement, US,
2007 - 2013
- Exhibit 18: Regular-Diameter Dental Implant Fixture Application Growth, by
Delivery Method, Loading Technique, and Single- or Multiunit Placement, US,
2008 - 2013
- Exhibit 19: Regular-Diameter Dental Implant Fixture Application, by Use of
Guided Surgery Technology, as a % of Total, US, 2007 - 2013
- Exhibit 20: Regular-Diameter Dental Implant Fixture Application, by Use of
Guided Surgery Technology, US, 2007 - 2013
- Exhibit 21: Regular-Diameter Dental Implant Fixture Application Growth, by
Use of Guided Surgery Technology, US, 2008 - 2013
- Exhibit 22: Regular-Diameter Dental Implant Fixture Market, by Shape, as a
% of Total, US, 2007 - 2013
- Exhibit 23: Regular-Diameter Dental Implant Fixture Market, by Shape, US
(US$), 2007 - 2013
- Exhibit 24: Regular-Diameter Dental Implant Fixture Market Growth, by
Shape, US, 2008 - 2013
- Exhibit 25: Regular-Diameter Dental Implant Fixture Market, by Surface
Treatment, as a % of Total, US, 2007 - 2013
- Exhibit 26: Regular-Diameter Dental Implant Fixture Market, by Surface
Treatment, US (US$), 2007 - 2013
- Exhibit 27: Regular-Diameter Dental Implant Fixture Market Growth, by
Surface Treatment, US, 2008 - 2013
- Exhibit 28: Regular-Diameter Dental Implant Fixture Market, by Type, as a
% of Total, US, 2007 - 2013
- Exhibit 29: Regular-Diameter Dental Implant Fixture Market, by Type, US
(US$), 2007 - 2013
- Exhibit 30: Regular-Diameter Dental Implant Fixture Market Growth, by
Type, US, 2008 - 2013
CHAPTER 4: FINAL ABUTMENT MARKET
- Exhibit 31: Final Abutment Market, US (US$), 2007 - 2013
- Exhibit 32: Final Abutment Market, by Type, as a % of Total, US, 2007 -
2013
- Exhibit 33: Final Abutment Market, by Type, US (US$), 2007 - 2013
- Exhibit 34: Final Abutment Market Growth, by Type, US, 2008 - 2013
CHAPTER 5: SMALL-DIAMETER DENTAL IMPLANT FIXTURE MARKET
- Exhibit 35: Small-Diameter Dental Implant Fixture Market, US (US$), 2007 -
2013 (Graphical Format)
- Exhibit 36: Small-Diameter Dental Implant Fixture Market, US (US$), 2007 -
2013 (Tabular Format)
- Exhibit 37: Small-Diameter Dental Implant Fixture Market Growth, US, 2008
- 2013
APPENDIX B: SUPPLEMENTAL EXHIBITS
- Exhibit 38: Dental Implant Market, by Segment, US (US$), 2007 - 2013
(Detailed Format)
- Exhibit 39: Regular-Diameter Dental Implant Fixture Units versus
Small-Diameter Dental Implant Fixture Units, US, 2007 - 2013 (Detailed Format)
- Exhibit 40: Final Abutment Market, by Type, as a % of Total, US, 2008 and
2013 (Detailed Format)
- Exhibit 41: Small-Diameter Dental Implant Fixture ASPs, US (US$), 2007 -
2013 (Detailed Format)
|
