Cover Image
市場調查報告書

印刷&彈性感測器的技術、企業、市場預測

Printed and Flexible Sensors 2017-2027: Technologies, Players, Forecasts

出版商 IDTechEx Ltd. 商品編碼 235627
出版日期 內容資訊 英文 196 Pages, 12 Tables, 161 Figures
商品交期: 最快1-2個工作天內
價格
Back to Top
印刷&彈性感測器的技術、企業、市場預測 Printed and Flexible Sensors 2017-2027: Technologies, Players, Forecasts
出版日期: 2016年11月29日 內容資訊: 英文 196 Pages, 12 Tables, 161 Figures
簡介

感測器在印刷電子產品的領域成為日益重要的角色。現在最大的用途是血糖試紙部門,不過漸漸縮小。下一代印刷感測器,能對應人機介面 (HMI) 到環境感測,廣泛的應用範圍。全球完全印刷感測器市場,預計2027年達到76億美元的事。

本報告提供印刷感測器及彈性感測器的技術及市場相關調查,感測器種類與概要,利用技術與用途,技術開發趨勢,10年市場預測,主要經營者及研究機關簡介等彙整資料。

第1章 摘要整理

第2章 市場預測

  • 範圍、定義
  • 市場規模
  • 生物感應器
  • 電容感測器
  • 壓電阻力感測器
  • 壓電感測器
  • 光電檢測器
  • 溫度感測器
  • 濕度感測器
  • 氣體感測器

第3章 生物感應器 (電化學)

  • 網版印刷電極
  • 血糖試紙
  • 印刷生物感應器的新的用途

第4章 電容感測器

  • 同樣結構、各種材料
  • 主要企業
  • 觸控螢幕用觸控感測器
  • 形成可能的容量性交換器
  • 電容型壓力感測
  • 液體液位感測器
  • 指紋感測器:可能印刷嗎?

第5章 壓電阻力感測器

  • 壓力感應器的厚膜
  • 完全印刷力覺感測器
  • 主要企業
  • 用途與市場
  • 壓電阻力感測器的新技術

第6章 壓電感測器

  • 主要企業
  • 印刷PZT(無機)
  • 壓電聚合物
  • 氨基酸

第7章 光電檢測器

  • 矽的替代的理由
  • 主要企業
  • 設備結構
  • 有機光電檢測器(OPD)
  • 混合CMOS影像感測器
  • TFT背板光電用檢測器

第8章 溫度感測器

  • 主要企業
  • 適合塑膠基板的墨水
  • 用途
  • 奈米碳管的無線溫度感測器

第9章 濕度感測器

  • 厚膜濕度感測器的原理
  • 主要企業
  • 印刷無線濕度感測器
  • 濕度、溫度感測器的整合

第10章 氣體感測器

  • 氣體感測器的各種類型(也含印刷之外)
  • 印刷氣體感測器的主要企業
  • 固體電解質的槳印刷氣體感測器
  • 技術創新

第11章 企業

  • 感測器類型、各地區企業目錄(80家公司以上)

本網頁內容可能與最新版本有所差異。詳細情況請與我們聯繫。

目錄

"Fully printed sensors will reach $7.6bn revenues by 2027."

Sensors that are printed on flexible substrates represent a growing market. Although the biggest segment - blood glucose test strips - is currently shrinking, the next generation of printed sensors will enable other applications, from human-machine interfaces to environmental sensing. IDTechEx predicts the market for fully printed sensors will reach $7.6 billion by 2027.

These sensors benefit from the latest materials and technologies in the printed electronics industry. While some may consist of a very simple structure with only a few electrodes, others are much more complex and require the deposition of multiple layers. What they have in common is the capability to be manufactured on plastic substrates, which offer advantages in terms of mechanical flexibility, thinness and weight reduction.

This report covers the following categories of printed sensors:

  • Biosensors
  • Capacitive sensors
  • Piezoresistive sensors
  • Piezoelectric sensors
  • Optical sensors
  • Temperature sensors
  • Humidity sensors
  • Gas sensors

                     Source: IDTechEx.

It should be noted that printing is not a new manufacturing technique in the sensor industry and in some cases, has been used as a standard process for many years. This report gives examples of the sensors that are based on "thick film", whereby some layers of sensing materials are deposited by screen printing. These devices are not fully printed but contain a printed layer of either a polymeric or ceramic material.

Growth in emerging applications

Printed disposable glucose sensors currently generate the majority of revenues. These sensors are used by diabetics as a self-diagnosis tool. This technology is essential for those patients but the market is now commoditized and there is pressure on price. This explains why the industry is developing new biosensors, where the innovation lies in recognizing various biomarkers.

Other printed and flexible sensors such as gas sensors, temperature sensors or photodetectors are now moving into mass production. This transition from R&D to commercialization will drive growth in emerging applications.

Photodetectors can be printed as single detectors or deposited on active matrix devices, either thin-film transistor (TFT) backplanes or CMOS chips. The various configurations lead to different addressable markets, such as image sensors or digital X-ray sensors.

IDTechEx has closely followed the progress of printed and flexible sensors for several years. Each emerging application is described in detail, based on direct conversations with sensor manufacturers and illustrated with photographs of real devices.

The complete picture

Save months of research by quickly learning who the key players are in printed and flexible sensors and the latest information. Get the complete picture on the various technologies, their applications and the market sizes.

The report includes 10-year revenue forecasts for printed and flexible sensors, with the following market segments:

  • Biosensors
  • Capacitive
  • Piezoresistive (force)
  • Piezoelectric
  • Photodetectors
  • Photodetectors on CMOS chip
  • Photodetectors on TFT backplane
  • Temperature
  • Humidity
  • Gas

The market data in the report are at the sensor module level, thereby avoiding the common issue of including other components and services (system integration) in the forecasts.

Also included in the report is a listing of over 80 companies making thick film sensors or fully printed sensors. Sorted by sensor category, this listing helps you identify potential partners and suppliers.

Analyst access from IDTechEx

All report purchases include up to 30 minutes telephone time with an expert analyst who will help you link key findings in the report to the business issues you're addressing. This needs to be used within three months of purchasing the report.

Table of Contents

1. EXECUTIVE SUMMARY

  • 1.1. Sensors in the printed electronics industry
  • 1.2. How printing enables flexibility
  • 1.3. Different stages of commercialization
  • 1.4. Market size and growth

2. MARKET FORECASTS

  • 2.1. Scope and definitions
    • 2.1.1. What is a sensor?
    • 2.1.2. What do we define as fully printed sensor?
  • 2.2. Market size overview
    • 2.2.1. Revenue forecast for all market segments
    • 2.2.2. CAGR per sensor type
    • 2.2.3. Revenue forecast for fully printed sensors only
    • 2.2.4. Other charts
  • 2.3. Biosensors
  • 2.4. Capacitive sensors
  • 2.5. Piezoresistive sensors
  • 2.6. Piezoelectric sensors
  • 2.7. Photodetectors
    • 2.7.1. Printed organic photodetectors
    • 2.7.2. Photodetectors on TFT backplanes
    • 2.7.3. Hybrid CMOS image sensors
  • 2.8. Temperature sensors
  • 2.9. Humidity sensors
  • 2.10. Gas sensors

3. BIOSENSORS (ELECTROCHEMICAL)

  • 3.1. Screen-printed electrodes
  • 3.2. Glucose test strips
    • 3.2.1. Screen printing vs. sputtering
    • 3.2.2. Technical challenges
    • 3.2.3. Competing technologies
    • 3.2.4. A multi-billion dollar market, but low growth
  • 3.3. Emerging applications of printed biosensors
    • 3.3.1. Wearable patches by Biolinq
    • 3.3.2. Saliva
    • 3.3.3. Cholesterol sensor
    • 3.3.4. BreathDX
    • 3.3.5. Tuberculosis testing
    • 3.3.6. Drug screening
    • 3.3.7. Breath sensing
    • 3.3.8. Enhancements with nanomaterials

4. CAPACITIVE SENSORS

  • 4.1. Same structure, different materials available
  • 4.2. Key players
  • 4.3. Touch sensors for touchscreens
  • 4.4. Formable capacitive switches
    • 4.4.1. A case study: the Ford Fusion
    • 4.4.2. Integration with Injection Moulding
    • 4.4.3. 3D shaped sensors based on PEDOT
  • 4.5. Capacitive pressure sensing
  • 4.6. Fluid level sensor
  • 4.7. Fingerprint sensors: will they be printed?

5. PIEZORESISTIVE SENSORS

  • 5.1. Pressure sensors with thick-film technology
    • 5.1.1. Ceramic vs. other common types of pressure sensors
    • 5.1.2. Construction of a ceramic pressure sensor
  • 5.2. Fully printed force sensors
    • 5.2.1. Sensor construction
  • 5.3. Key players
  • 5.4. Applications and markets
    • 5.4.2. Consumer electronics
    • 5.4.3. Automotive
    • 5.4.4. Medical
    • 5.4.5. Musical instruments
    • 5.4.6. Strain and bend sensors
  • 5.5. New technologies in piezoresistive sensors
    • 5.5.1. Quantum tunnelling composite (QTC)
    • 5.5.2. Interpolation for large area sensing
    • 5.5.3. Piezoresistive textile
    • 5.5.4. Artificial skin made with gold nanoparticles

6. PIEZOELECTRIC SENSORS

  • 6.1. Key players
  • 6.2. Printed PZT (inorganic)
    • 6.2.2. Temperature requirements
    • 6.2.3. Inkjet printing technology from Ricoh
  • 6.3. Piezoelectric polymers
    • 6.3.2. Material suppliers
    • 6.3.3. Sensor arrays for novel user interfaces
    • 6.3.4. Wearable sensor
    • 6.3.5. Heat sensing with piezoelectric polymers
  • 6.4. Printed amino acids

7. PHOTODETECTORS

  • 7.1. Reasons to replace silicon
  • 7.2. Key players
  • 7.3. Device structure
    • 7.3.2. Screen-printing
    • 7.3.3. Slot die coating
  • 7.4. Organic photodetectors (OPD)
    • 7.4.1. Enabling new form factors for optical sensors
    • 7.4.2. ISORG building a production line for organic photodetectors
    • 7.4.3. OLED and OPD device for pulse oximetry (UC Berkeley)
    • 7.4.4. Academic research: photodetectors on textile
  • 7.5. Hybrid CMOS image sensors
    • 7.5.1. Organic semiconductors on CMOS chip
    • 7.5.2. Quantum dots on CMOS chip
  • 7.6. Photodetectors on TFT backplane
    • 7.6.1. The role of photodiodes in X-ray sensors
    • 7.6.2. NikkoIA develops organic imaging technology for X-rays sensors
    • 7.6.3. Demonstration from the Flexible Display Center (Arizona State University)
    • 7.6.4. Collaboration between ISORG and FlexEnable demonstrates flexible image sensors
    • 7.6.5. Collaboration between Imec, Holst Centre, and Philips Research

8. TEMPERATURE SENSORS

  • 8.1. Key players
  • 8.2. Inks compatible with plastic substrates
    • 8.2.1. PST Sensors: Silicon nanoparticles ink
    • 8.2.2. Research at PARC (Xerox)
    • 8.2.3. Organic heat sensor
  • 8.3. Applications
    • 8.3.1. Electronic tags as a replacement for time-temperature indicators
    • 8.3.2. First proof-of-concept prototype of an integrated printed electronic tag
    • 8.3.3. Wearable temperature monitors
    • 8.3.4. Exploring new applications
  • 8.4. Wireless temperature sensor made with carbon nanotubes

9. HUMIDITY SENSORS

  • 9.1. Principles of thick film humidity sensors
    • 9.1.1. Porous ceramics humidity sensors
    • 9.1.2. Polymeric humidity sensors
  • 9.2. Key players
  • 9.3. Printed wireless humidity sensors
    • 9.3.1. Western Michigan University
    • 9.3.2. Application to building monitoring
    • 9.3.3. Invisense wins grant to develop new product
  • 9.4. Integration of humidity and temperature sensors
    • 9.4.1. PST Sensors
    • 9.4.2. Brewer Science: ultrafast response with carbon nanotubes

10. GAS SENSORS

  • 10.1. Different types of gas sensors, not all can be printed
    • 10.1.1. Pellistors
    • 10.1.2. Infrared
    • 10.1.3. Electrochemical
    • 10.1.4. Chemiresistors
    • 10.1.5. Electronic nose (e-nose)
  • 10.2. Key players in printed gas sensors
  • 10.3. All-printed gas sensors with solid electrolytes
    • 10.3.1. SPEC sensors
    • 10.3.2. Honeywell
  • 10.4. Other innovations
    • 10.4.1. Aerosol jet printing
    • 10.4.2. Inkjet Printing
    • 10.4.3. New electronic nose device with inkjet-printed semiconductor
    • 10.4.4. Research on acetone breath analysis

11. COMPANIES

  • 11.1. An index categorising over 80 companies by sensor type and geography

TABLES

  • 3.1. Range of ink for printed biosensors from DuPont
  • 3.2. Some of the most pressing technical challenges for printed glucose test strips
  • 4.1. Companies involved in printed capacitive sensors
  • 5.1. The key players in printed piezoresistive force sensors
  • 5.2. Comparison of piezoresistive force sensors versus capacitive touch sensors
  • 6.1. The key players in printed piezoelectric sensors
  • 6.2. Main specifications of PiezoPaint (preliminary data)
  • 7.1. Which companies are developing printed photodetectors
  • 8.2. Key players in printed temperature sensors
  • 9.1. Key players in fully printed humidity sensors
  • 10.1. Key players in printed gas sensors - companies and associated technologies
  • 11.1. Listing of over 80 companies involved in printed sensors

FIGURES

  • 1.1. How printed electronics enable flexible devices
  • 1.2. Two types of printable materials
  • 1.3. Market forecast for printed and flexible sensors to 2027 (in $ million)
  • 1.4. Market for printed and flexible sensors (excl. glucose strips)
  • 1.5. Projected market growth during the period 2016-2027 (in $ million)
  • 2.1. Multiple definitions of a sensor
  • 2.2. Market forecasts for all segments, until 2027 (in $ million)
  • 2.3. Compound annual growth rate between 2017-2027
  • 2.4. Projected market growth during the period 2016-2027
  • 2.5. Market forecast for fully printed sensors to 2027 (in $ million)
  • 2.6. Market forecast for printed sensors, excluding glucose test strips
  • 2.7. Printed area in square meters, excluding glucose test strips
  • 2.8. Printed and flexible sensors: revenues by category
  • 2.9. Comparison of each segment size by 2021 (excl. glucose strips)
  • 2.10. Market for printed and flexible sensors (excl. glucose strips)
  • 2.11. Market for printed biosensors ($ million)
  • 2.12. Market for capacitive sensors ($ million)
  • 2.13. Market for printed piezoresistive sensors ($ million)
  • 2.14. Market for printed piezoelectric sensors ($million)
  • 2.15. Market for printed photodetectors ($million)
  • 2.16. Market for photodetectors on TFT backplane sensors ($million)
  • 2.17. Market for hybrid CMOS image sensors ($ million)
  • 2.18. Market for printed temperature sensors ($million)
  • 2.19. Market for printed humidity sensors ($million)
  • 2.20. Market for printed gas sensors ($million)
  • 3.1. Screen printed electrode (SPE) from DropSens
  • 3.2. Example of a reader measuring the glucose level from a test strip.
  • 3.3. Glucose meter for iPhone
  • 3.4. No generic design: test strips vary from manufacturer to manufacturer.
  • 3.5. Advantages of printing vs. sputtering on a scale of 1 to 5 (higher is better).
  • 3.6. Evolution of sample volume needed
  • 3.7. Glucose sensing contact lens
  • 3.8. Various types of electrochemical measurement techniques
  • 3.9. Wearable device prototype, showing the disposable sensor patch
  • 3.10. Sensor fabrication is based on screen printing
  • 3.11. Sensor for mouthguard
  • 3.12. Smart Integrated Miniaturised Sensor (SIMS)
  • 3.13. DRUGSENSOR for drug screening
  • 3.14. Sensor array for glucose breathalyser
  • 3.15. Batch of sensors on plastic film
  • 3.16. Comparison between unmodified and CNT coated SPE.
  • 3.17. The Omega 3 system, consisting of a reader and a microfluidic cartridge
  • 3.18. Nanostructured copper
  • 4.1. Metal mesh printed using high precision screen printing on PET substrates
  • 4.2. Direct Dry printing of carbon nanotubes
  • 4.3. The T-Ink overhead console
  • 4.4. Side by side comparison between the standard equipment and the new one
  • 4.5. Decorative and conductive inks are printed onto formable films
  • 4.6. An example of integration by PolyIC
  • 4.7. The touch sensor as the main interface of a car centre stack
  • 4.8. In-Mold Electronics
  • 4.9. Examples of functionalities on a control panel
  • 4.10. Demonstrator from Heraeus
  • 4.11. Demonstrator from Agfa
  • 4.12. An array for pressure mapping
  • 4.13. Storeskin is a concept by Plastic Electronic GmbH
  • 4.14. Capacitive force touch sensor
  • 4.15. Fluid level sensor
  • 4.16. Live demonstration of fluid level sensor at IDTechEx event (Berlin 2016)
  • 5.1. Comparison between thin film, thick film piezoresistive and silicon piezoresistive pressure sensors
  • 5.2. Construction of a thick film pressure sensor.
  • 5.3. Principles of piezoresistive sensors (force sensing resistors)
  • 5.4. Two types of device construction
  • 5.5. Printed piezoresistive force sensor construction
  • 5.6. Force sensor construction variant
  • 5.7. Examples of ink suppliers
  • 5.8. Common applications of printed piezoresistive sensors
  • 5.9. Peratech's QTC material inside a 5-way input device (Navikeys) from Samsung Electromechanics (2010).
  • 5.10. Thin and lightweight keyboard for tablets
  • 5.11. A look at the keyboard construction
  • 5.12. Possible locations of various force sensors in a car
  • 5.13. Large area piezoresistive sensor array demonstrated at Printed Electronics USA 2014
  • 5.14. Strain and bend sensor
  • 5.15. Artist view and actual microscope image of the QTC material.
  • 5.16. Tactonic Technologies extra-large touchpad
  • 5.17. Tactonic's customizable sensor design
  • 6.1. Ulthera skin imaging device in use.
  • 6.2. Evolution in screen printing of piezoelectric materials
  • 6.3. Magnified photograph of the PZT sample
  • 6.4. "Coffee stain effect" in ink jet printing
  • 6.5. Synthesis of technologies to achieve accurate printing
  • 6.6. Piezoelectric response of screen printed PVDF-TrFE on PEN substrate
  • 6.7. Solvene can be printed or spin coated
  • 6.8. Average transmittance (visible range between 400 nm and 700 nm), measured on 25-m thick film
  • 6.9. PyzoFlex, a pressure-sensing input device.
  • 6.10. PyzoFlex sensor array overlaid on a LCD screen.
  • 6.11. Flexsense prototype by Microsoft Research
  • 6.12. Wearable sensor that detects bends
  • 6.13. Schematic showing the printed polymer sensor connected to an organic transistor.
  • 6.14. Heat sensor based on PVDF-TrFe
  • 6.15. Heat sensor prototype
  • 6.16. Schematic of the amino acid film on a flat substrate
  • 6.17. Fabrication of the prototype sensor array
  • 6.18. Pressure sensing floor mat (80cm x 80cm)
  • 6.19. Change of capacitance with an applied load from 20 to 10,000 N.
  • 7.1. Main drivers to replace silicon in two applications: CMOS image sensors and X-ray sensors
  • 7.2. Structure of OPD device
  • 7.3. Pilot line for OPD fabrication
  • 7.4. Slot die coating of photodetector on a backplane
  • 7.5. Organic photodiode characteristics (for near infra-red)
  • 7.6. Organic photodiode characteristics (for visible light).
  • 7.7. Benchmark of OPD v.s silicon photodiode
  • 7.8. Plastic foil of organic photodetectors
  • 7.9. OPD for object detection by smart systems: logistics, retail, Point-Of-Sales display
  • 7.10. 8x8 arrays of organic photodetectors on a board
  • 7.11. Materials available for visible and infrared sensing
  • 7.12. Flexible pulse oximeter concept
  • 7.13. Scanning electron micrograph image of the tin dioxide cloth
  • 7.14. Organic CMOS image sensor and conventional image sensor
  • 7.15. Image comparison
  • 7.16. Image sensor pixel (top view)
  • 7.17. Materials available for QuantumFilm
  • 7.18. Absorbing blue vs. red light in silicon vs. QuantumFilm
  • 7.19. CMOS VGA organic image sensor with 15μm-pixels:
  • 7.20. Principles of an indirect conversion digital radiography system
  • 7.21. Organic image sensors sensitive to X-rays, visible, and near infrared spectrum ranges.
  • 7.22. Potential radiography applications for flexible display technology
  • 7.23. 4.9 inch X-ray sensor at SID2012
  • 7.24. ISORG and Plastic Logic demonstrate a flexible image sensor
  • 7.25. Live demonstration of the sensor at Printed Electronics USA 2013 (tradeshow)
  • 7.26. Comparison of leakage current of the OTFT with other commonly used technologies
  • 7.27. Fingerprint sensor, demonstrated at the IDTechEx Show
  • 7.28. Fully-organic, flexible imager developed by imec, Holst Centre and Philips Research.
  • 8.1. Typical response from a RTD (Pt100) and a thermistor
  • 8.2. Pseudo linear response curve from platinum RTD (Pt-100)
  • 8.3. Silicon nanoparticles ink
  • 8.4. Negative Temperature Coefficient (NTC) thermistor
  • 8.5. Printed thermistor from PST sensor demonstrated at Printed Electronics Europe 2013
  • 8.6. Printed temperature sensor for Thinfilm's smart label (made by PST sensors)
  • 8.7. Combination sensor and chip on the same plastic substrate
  • 8.8. Printed thermistor array on PET, made by PST sensors
  • 8.9. Colour evolution of HEATmarker time-temperature indicators
  • 8.10. Demonstrator with various components from ThinFilm, PARC, Acreo and PST Sensors
  • 8.11. The concept of printed smart labels
  • 8.12. Temperature sensor writing into memory
  • 8.13. NTC temperature sensor on flexible printed circuit
  • 8.14. Temperature sensing patch
  • 8.15. A printed heat sensor
  • 8.16. All-organic temperature sensor
  • 8.17. All-organic temperature sensor evaluation
  • 9.1. Porous ceramics humidity sensor
  • 9.2. Resistive and capacitive read-out
  • 9.3. Impedance response of a polymeric humidity sensor
  • 9.4. Capacitance readout at 25°C.
  • 9.5. Recommended signal conditioning circuit for capacitive readout in relative humidity (RH) sensors
  • 9.6. Printed Wireless Humidity Sensors On Flexible Substrates
  • 9.7. Wireless humidity sensor label
  • 9.8. Printed and Flexible humidity sensor by PST Sensors
  • 9.9. Flexible absolute humidity sensor
  • 9.10. Live speech detection by humidity sensing
  • 10.1. Metal-oxide gas sensor
  • 10.2. An electronic nose is a recognition system, not a sensor technology
  • 10.3. KWJ Engineering technology roadmap
  • 10.4. Characteristics of the CO sensor
  • 10.5. Sensor response to different levels of carbon monoxide
  • 10.6. Sensors available in 2016
  • 10.7. Detection limits
  • 10.8. Portable pollution detector with a CO sensor
  • 10.9. Photograph of a wafer containing 48 sensors.
  • 10.10. Varying power consumption of the metal oxide gas sensors
  • 10.11. Cross section representation
Back to Top