Cover Image
市場調查報告書

俄羅斯的層積造型技術用金屬粉末:生產、市場、預測

Metal Powders for Additive Technologies in Russia: Production, Market and Forecast

出版商 INFOMINE Research Group 商品編碼 353063
出版日期 內容資訊 英文
商品交期: 請詢問到貨日
價格

Notice: The original report is written in Russian. Please ask us for more information regarding delivery time.

Back to Top
俄羅斯的層積造型技術用金屬粉末:生產、市場、預測 Metal Powders for Additive Technologies in Russia: Production, Market and Forecast
出版日期: 2016年02月23日 內容資訊: 英文
簡介

本報告提供俄羅斯國內的層積造型技術 (3D列印) 用金屬粉末的市場相關分析,全球整體的層積造型設備 (3D印表機) 及原料用金屬粉末的市場結構、趨勢,及俄羅斯國內的層積造型用金屬粉末的消費量、進口量,主要的需求者、供應商 (外資/國內) 簡介的資訊彙整,為您概述為以下內容。

摘要

簡介

第1章 使用全球層積造型技術、市場 (專用設備及金屬粉末的事項) 現況

第2章 全球層積造型用技術金屬粉末的生產技術、產品結構

第3章 俄羅斯國內的層積造型技術用金屬粉末的生產量

第4章 俄羅斯的層積造型設備 (金屬粉末用) 的進口額 (過去7年份)

第5章 俄羅斯的層積造型技術用金屬粉末的進口額 (過去7年份)

第6章 俄羅斯國內的層積造型技術用金屬粉末主要的需求者

  • OJSC "Aviadvigatel"
  • PJSC "NPO "Saturn"
  • CJSC "Novomet-Perm"
  • The technological competence center for additive technologies" (CTCAT,voroneji)

第7章 俄羅斯的層積造型技術和金屬粉末的市場:現狀與未來展望

附錄1 俄羅斯國內的層積造型技術用金屬粉末市場參與企業:聯絡處

附錄2 俄羅斯國內的層積造型設備市場上,外資的供應商和國內的進口業者:進口商品的特徵和進口量/價格 (過去7年份)

附錄3 俄羅斯國內的層積造型技術用金屬粉末市場上,外資的供應商和國內的進口業者:進口商品的特徵和進口量/價格 (過去7年份)

圖表一覽

目錄

This report is the 1st edition of the research market of metal powders for additive technologies in Russia.

The purpose of research - market analysis of additive technologies using metal powders in Russia.

This work is a Desk study. As information sources used data of Rosstat, Federal customs service of Russia, the materials sector and regional press, annual and quarterly reports of companies, websites of enterprises, scientific-technical literature, the database "INFOMINE".

The chronological scope of the study: 2009-2015

Geography research: Russia.

Volume of research: report consists of 7 Chapters, contains 72 pages including 15 tables, 21 figures and 3 appendices.

The first Chapter is devoted to review the state of the additive technologies in the world. Shows the main global companies in the market of additive technologies. The characteristics of the produced 3D printers using metal powders.

The second Chapter presents the main technologies of production of metal powders for additive technologies and the equipment. Also presents a range of international manufacturers of metal powders for additive technologies.

The third Chapter is devoted to the production of metal powders for additive technologies in Russia. Describes the company that creates the capacity for production of these products.

The fourth Chapter presents data on imports of the Russian Federation in 2009-2015 equipment for additive technologies that use metal powders, with distribution by supplier. Chapter is supplemented with detailed information about Russian importers, overseas suppliers of 3D printers, and the feature of the equipment in 2009-2015

The fifth Chapter presents data on imports from the Russian Federation for 2009-2014 five kinds of metal powders for additive technologies from the distribution provider. Also, given the dynamics of import prices on various kinds of powders. Chapter is supplemented with detailed information about the Russian importers and foreign suppliers of metal powders for additive technologies (2009-2015).

The sixth Chapter is devoted to the description of the situation with the development of additive technologies in a number of major participants in this market (OJSC "Aviadvigatel", JSC "NPO "Saturn", JSC "Novomet-Perm", etc.)

In the seventh Chapter an overview of the status and prospects of development of the additive technologies in Russia, given the estimated forecast of market size of 3D printers and metal powders for additive technologies in the near term (2016-2018).

The Appendix presents contact information on the main companies operating in the market of additive technologies in Russia, extensive information on import of 3D printers and metal powders by Russian enterprises.

Target audience research:

  • market participants additive technologies;
  • potential investors.

The proposed study claims the role of reference for professionals working in the market of additive technologies, and decision management solutions.

Table of Contents

Abstract

Introduction

1. The condition of additive technologies in the world, produced by the equipment using metal powders

2. The production technology and mix of metal powders for additive technologies in the world

3. Production of metal powders for additive technologies in Russia

4. Russian imports of machines for additive technologies with metallic powders in 2009-2015

5. Russia's imports of metal powders for additive technologies in 2009-2015

6. Main company-consumers of metal powders for additive technologies in Russia

  • OJSC "Aviadvigatel"
  • PJSC "NPO "Saturn"
  • CJSC "Novomet-Perm"
  • The technological competence center for additive technologies" (CTCAT, Voronezh)

7. Status and prospects of the additive technologies in Russia and use them for metal powders

Appendix 1. Address book key market participants additive technologies using metal powders in Russia

Appendix 2. Foreign suppliers and Russian importers of vehicles of additive technologies for metallic powders, the characteristic of the imported products, the amount/price (2009-2015)

Appendix 3. Foreign suppliers and Russian importers of metal powders for additive technologies, characteristics of the imported products, the amount/price (2009-2015)

List of Tables

  • Table 1: Main parameters of the 3D apparatus for layer-by-layer synthesis of metal-powder compositions
  • Table 2: Plan characteristics the experimental setup of layered growth of CNIITMASH
  • Table 3: Areas of parts of various metal powders obtained by laser sintering
  • Table 4: composition of Powder supplied by the manufacturers of AM-machines
  • Table 5: Nomenclature of powders company LPW Technology for use in AM machines
  • Table 6: Techno-economic performance of the unit centrifugal atomization of the melt, LLC "Sheremet"
  • Table 7: Countries-suppliers to Russia of metal powders for additive technologies in 2009-2015, thous.
  • Table 8: deliveries to Russia of 3D printers the main foreign manufacturers in 2009-2015, units
  • Table 9: deliveries to Russia of 3D printers the main foreign manufacturers in 2009-2015, units
  • Table 10: Russian Imports of metal powders for additive technologies by type in 2009-2015, kg
  • Table 11: Countries-suppliers to Russia of metal powders for additive technologies in 2009-2015, kg
  • Table 12:. Deliveries to Russia of metal powders for additive technologies, the main foreign manufacturers in 2009-2015, kg
  • Table 13: Russian importers of metal powders for additive technologies in 2009-2015, kg
  • Table 14: Russian importers of metal powders for additive technologies in 2009-2015, kg
  • Table 15: Import prices for Russian metal powders for additive technologies from different foreign manufacturers in 2009-2015, in USD/kg

List of Tables

  • Figure 1: Schematic diagram of the apparatus selective laser sintering (SLS)
  • Figure 2: Apparatus for selective laser melting SLM 280 SLM Solution company (Germany)
  • Figure 3: AM-machine X line 1000R by Concept Laser
  • Figure 4: AM-machine EOSINT 280 company EOS
  • Figure 5: Schematic diagram of the technology of electron beam melting (Electron Beam Melting - EBM)
  • Figure 6: Apparatus DMD IC106
  • Figure 7: the office of the company Optomec LENS MR7
  • Figure 8: Melting chamber atomizer VIGA 2
  • Figure 9: Atomizer 50 EIGA
  • Figure 10: The Atomizer Hermiga 75/3
  • Figure 11: Atomizer company Atomising Systems
  • Figure 12: Installation of centrifugal atomization of the melt, LLC "Sheremet"
  • Figure 13: Installation of layer-by-layer laser sintering M2 Cusing the company of "Concept Laser"
  • Figure 14: roadmap for the development of additive technologies of Rosatom
  • Figure 15: Atomizer ALD VIGA-2B
  • Figure 16: Dynamics of Russian imports of 3D printers for metal powders in 2009-2015, units/thous. USD.
  • Figure 17: Dynamics of Russian imports of parts of 3D printers for metal powders in 2009-2015, thous. USD.
  • Figure 18: Structure of supplies to Russia of 3D printers the main foreign manufacturers in 2009-2015,%
  • Figure 19: Dynamics of Russian imports of metal powders for additive technologies in 2009-2015, kg/thous USD.
  • Figure 20: Structure of import of metal powders for additive technologies by type in 2009-2015, %
  • Figure 21: areas of work the Centre for additive technologies PJSC "NPO "Saturn"
Back to Top