This report is currently available in Russian language only. However, we can provide an English version of the report within 3 weeks after receiving a payment.
Abstract
This study focuses on market analysis of glass-basalt-reinforced plastic pipes
in Russia.
The work consists of 9 chapters, the volume of the report is 139 pages. The
text is illustrated with 45 tables and 25 figures.
Chapters 1-2 briefly introduces the properties of glass-basalt-reinforced
plastic pipes and demonstrate their basic competitive advantages compared with
other types of pipes.
Information presented in Chapter 3 on resources provision of commodity
production of glass-basalt-reinforced plastic pipes - glass and basalt fibers
and resins, suggests that the industry in future will face constraints.
The chapter provides an overview of technologies for the production of plastic
pipes with an estimate of possible costs of their use.
Chapter 4 is the main part of the study. In addition to characteristics of the
industry, the chapter provides detailed information on all major
enterprise-producers.The main attention is paid to the analysis of production
and the definition of segments in which they operate.
In chapters 5 and 6 detailed analysis of foreign trade operations in
glass-basalt-reinforced plastic pipes is given, with data on dynamics of their
import and export, the main characteristic of the foreign producers operating
in the Russian market, the existing industries in the CIS countries.
Chapter 7 presents the practice of the use of glass-reinforced plastic pipes,
the prospect of development of their major end-uses, assesses the capacity of
the Russian pipe market in the oil industry and pipeline systems in housing
and communal services.
Chapter 8 provides information on domestic equipment for production of
glass-basalt-reinforced plastic pipes.
Compiling results of the analysis of all materials is presented in Chapter 9,
which provides expert assessment of the production of glass-basalt-reinforced
plastic pipes in Russia for the period up to 2015.
The major and primary source materials were the data of companies and
telephone interviews with their representatives. They allowed us to estimate
condition of the sector as a whole and position of each company, to make
adjustments to the data of the Federal State Statistics Service (FSSS) of
Russia, which inaccurately and incorrectly reflect the situation in the
industry. Foreign trade transactions were analyzed on the basis of data from
the Federal Customs Service (FCS) of Russia. Information from regional media
produced considerable assistance in the work of experts on the market analysis.
LLC "InfoMine" hopes that this research will help professionals in their own
assessment of the market of glass-basalt-reinforced plastic pipes in Russia,
in making adequate decisions in the current market conditions.
Report Statistics
- Date Published: September, 2010
- Total Number of Pages: 139
- Total Number of Tables: 45
- Total Number of Figures: 25
Table of Contents
Abstract
Introduction
1. Characterization of glass-basalt-reinforced plastic pipes
- 1.1. Classification of glass-basalt-reinforced plastic pipes
- 1.2. Glass-basalt-reinforced plastic pipes based on polyester resin binder
(GRP)
- 1.3. Glass-basalt-reinforced plastic pipes based on epoxy resin binder
(GRE)
- 1.4. Types of construction of pipe walls
- 1.5. Types of pipe joints
2. Basic properties of glass-basalt-reinforced plastic pipes
- 2.1. Competitiveness of glass-basalt-reinforced plastic pipes
- 2.1.1. Comparison with metal pipes
- 2.1.2. Comparison with pipes made of thermoplastic materials
- 2.1.3. Comparison with the pipes made of mineral materials
- 2.1.4. Comparison with cast-iron pipes
- 2.2. Glass-basalt-reinforced plastic pipes in Arctic conditions
3. Raw materials for production of glass-basalt-reinforced plastic pipes
- 3.1. Raw materials for manufacture of pipes
- 3.1.1. Fibers
- 3.1.2. Resins
- 3.2. Overview of technologies for the production of
glass-basalt-reinforced plastic pipes
- 3.2.1. Technology "Ameron" (USA)
- 3.2.2. Technology Sarplast Group (Italy)
- 3.2.3. RPN Technology (Russia)
- 3.2.4. Technology "Composite-Oil (Russia)
- 3.2.5. Technology "Hobas (Germany)
- 3.2.6. Technology "Verok" (Flight), Norway (U.S.)
- 3.2.7. Technology "Parmaplast" (Russia)
4. Characteristics of key producers
- 4.1. Producers of glass-reinforced plastic pipes
- 4.1.1. LLC NPP "Plant of glass-reinforced plastic pipes"
- 4.1.2. LLC "Technologies of glass-reinforced plastic pipelines"
- 4.1.3. Company "New Pipe Technologie"
- 4.1.4. LLC "TruboprovodSpetsStroy"
- 4.1.5. JSC DPO "Plastic"
- 4.1.7. Other manufacturers
- 4.2. Production of glass-basalt-reinforced plastic pipes in 2006-2010
- 4.2.1. LLC "Plant of basalt pipes"
- 4.2.2. JSC "SanTechProm"
5. Foreign trade operations in glass-reinforced plastic pipes in 2004-2010
- 5.1. Imports of glass-reinforced plastic pipes
- 5.2. Characteristics of prices on imported pipes
- 5.2. Exports of glass-reinforced plastic pipes
6. Basic foreign manufacturers of glass-reinforced plastic pipes, represented in the Russian market
- 6.1. Amiantit, Flowtite, Ampox
- 6.2. Group of Companies Hobas AG (Switzerland) and Hobas Ingeneering GmbH
(Austria)
- 6.3. Ameron International Corporation
- 6.4. Xinjiang Yongchang Sekisui Composites Co. Ltd.
- 6.5. Production of glass-reinforced plastic pipes in the CIS countries
7. Consumption and estimate of the market capacity of glass-basalt-reinforced plastic pipes in Russia in 2004-2010
- 7.1. Consumption of glass-basalt-reinforced plastic pipes
- 7.2. Consumption of glass-basalt-reinforced plastic pipes in oil and gas
industry
- 7.3. Pipeline network of housing and communal services
- 7.4. Pipeline network of housing and communal services in Far Eastern
Federal District (FEFD)
8. Domestic equipment for the production of glass-reinforced plastic pipes
- 8.1. Group of Companies Mashspetsstroy
- 8.2. LLC "SKB-4"
- 8.3. CJSC "Safit" (LLC "Alpastar")
9. Forecast of production of glass-reinforced plastic pipes in 2008-2012
- 9.1. Forecast of production
- 9.2. Projects for the production of glass-basalt-reinforced plastic pipes
Annex 1. Characteristics of pipeline networks of the Sakha Republic
(Yakutia)
Annex 2. Contact data of main players of market of
glass-basalt-reinforced plastic pipes
List of Tables:
- Table 1. List of persons who have assisted in the preparation of the
report materials
- Table 2. Pipe stiffness parameters in various standardization systems
- Table 3. Types of the inner layer of pipes and their influence on the
specifications
- Table 4. Dependence of physical and mechanical properties on the type of
winding
- Table 5. Scope of application of glass-reinforced plastic pipes based on
polyester resin binder
- Table 6. Scope of application of glass-reinforced plastic pipes on epoxy
binder
- Table 7. Characteristics of single- and double-layer pipes
- Table 8. Economic aspects of the use of metal and glass-reinforced plastic
pipes
- Table 9. Production of commodity continuous glass fiber in 2003-2009, t
(excluding glass, addressed to the production of heat-insulating products)
- Table 10. The chemical composition of basalt and glass
- Table 11. Basic properties of glass and basalt fibers
- Table 12. Dynamics of production of glass-basalt-reinforced plastic pipes
in Russia in 2003-2010, km
- Table 13. Characterization of glass-reinforced plastic pipes, manufactured
by the main producers
- Table 14. Mix of produced tubing and casing pipes and their characteristics
- Table 15. Specifications of pipes PMTP
- Table 16. Specifications of fiberglass rod
- Table 17. Specifications of pipes, produced by LLC "NTT"
- Table 18. Substances, which are not recommended for transportation through
the pipes "NTT"
- Table 14. Specifications of pipes of JSC DPO "Plastic" for trenchless
laying
- Table 20. Mix and prices on pipes, produced by JSC JV" Dagneftindustriya "
- Table 21. Basic physical and mechanical properties of pipes, produced by
JSC "JV" Dagneftindustriya"
- Table 22. Assortment of glass-reinforced plastic pipes, manufactured by
LLC "Armplast"
- Table 23. Range and prices on products of LLC "ZBT"
- Table 24. Glass-reinforced plastic pipes for hot water and heat supply and
fittings for them, produced by JSC "SanTechProm"
- Table 25. Basic suppliers of glass-reinforced plastic pipes in 2007-2009
- Table 26. Dynamics of imports of glass-reinforced plastic pipes by
countries in 2004-2009, t
- Table 27. Basic importers of glass-reinforced plastic pipes in 2008-2009
- Table 19. Dynamics and exports of glass-reinforced plastic pipes in
2004-2009, t
- Table 29. Specifications of pipes "Flowtite"
- Table 30. Characteristics of pipes of grade Bondstrand
- Table 31. Characteristics of pipes of grade Centron
- Table 32. Specifications
- Table 33. Calculation of consumption of glass-basalt-reinforced plastic
pipes in 2004-2010, km
- Table 34. Comparative evaluation of production of glass-reinforced plastic
pipes and pipes substitute for oil industry in 2007-2009, km, %
- Table 35. Characteristics of pipeline networks for utilities in Russia as
a whole and by Federal Districts of Russia in 2007-2009
- Table 36. Characteristics of utilities pipeline networks in the Far
Eastern Federal District 2007-2009, km, %
- Table 37. Performance of lines LIS-400 and LIST-600
- Table 38. Characteristics of winding machines of Group of Companies
Mashspetsstroy
- Table 39. Characteristics of polymerization chambers of Group of Companies
Mashspetsstroy
- Table 40. Technical characteristics of the basic models of machines of LLC
"SKB-4"
- Table 41. Equipment for the production of glass-reinforced plastic pipes,
produced by division "Alpastar"
- Table 42. List of main and auxiliary equipment required for production of
glass-reinforced plastic pipes
- Table 43. The characteristics of heat and steam networks of the Republic
of Sakha (Yakutia) in the double pipe equivalent for 2007-2009, km
- Table 44. Characteristics of street water supply network in the Republic
of Sakha (Yakutia) in the one pipe equivalent for 2007-2009, km
- Table 45. Characteristics of one-pipe street sewer network in the Republic
of Sakha (Yakutia) for 2007-2009, km
List of Figures:
- Figure 1. Dynamics of production of polyester resins in 2003-2009, t
- Figure 2. Dynamics of production of epoxy resins in 2003-2009, t
- Figure 3. Dynamics and production structure of glass-basalt-reinforced
plastic pipes by end-uses in 2003-2010, km, %
- Figure 4. Dynamics and production structure of glass-basalt-reinforced
plastic pipes by type of reinforcing fibers in 2003-2010, km, %
- Figure 5. An assessment of the production of glass-reinforced plastic
pipes by LLC "ZST" in 2007-2009, km
- Figure 6. Dynamics of production of glass-reinforced plastic pipes by LLC
"TST" in 2007-2010, km
- Figure 7. Dynamics of production of glass-reinforced plastic pipes of LLC
"NTT" in 2008-2010, km
- Figure 8. Dynamics of production of glass-reinforced plastic pipes by LLC
"TSS" in 2003-2009, km
- Figure 9. Dynamics of production of glass-reinforced plastic pipes in the
JSC "DPO" Plastic" in 2005-2009, km
- Figure 10. Dynamics of production of glass-reinforced plastic pipes by JSC
"JV" Dagneftindustriya" in 2003-2010, t
- Figure 11. Dynamics of production of glass-reinforced plastic pipes by
CJSC "AMK-Vigas" in 2006-2010, km
- Figure 12. Dynamics of production of basalt-plastic pipes in 2006-2010 in
the LLC "Plant of basalt-plastic pipes", km
- Figure 13. Dynamics of production of glass-basalt-reinforced plastic pipes
in the JSC "SanTechProm" in 2007-2010, m
- Figure 14. Dynamics of export-import operations in fiberglass pipes in
2001-2007, t
- Figure 15. Dynamics of imports of glass-reinforced plastic pipes in
2004-2010, t, %
- Figure 17. Regional structure of imports of composite pipes in 2008-2009
- Figure 17. Dynamics of imports of glass-reinforced plastic pipes in
2004-2010 in terms of value (thousand $) and the average cost of 1 ton of
pipes (thousand $ / t)
- Figure 18. The average selling price of 1 t of glass-reinforced plastic
pipes in 2008-2009, thousand $ (without VAT)
- Figure 19. Dynamics of exports of glass-reinforced plastic pipes in
2004-2009, t
- Figure 20. Dynamics of consumption of glass-basalt-reinforced plastic
pipes in 2004-2010, km, %
- Figure 21. Amounts of financial cost for the replacement and repair of
utilities pipe networks in 2007-2009, mln rubles, km
- Figure 22. The distribution of the length of pipeline networks in the
housing in FEFD (2009)
- Figure 23. Capacity of the Far Eastern market of glass-basalt-reinforced
plastic pipes of large diameter (1200 mm) depending on the percentage of
replacing of metal pipes with glass-basalt-reinforced plastic pipes (km)
- Figure 24. Capacity of the Far Eastern market of glass-basalt-reinforced
plastic pipes middle diameter (300-1000 mm) depending on the percentage of
replacing of metal pipes with glass-basalt-reinforced plastic pipes (km)
- Figure 25. Forecast of production of glass-basalt-reinforced plastic pipes
up to 2015, km
