日本的牙科修補及CAD/CAM設備市場:2011年 是由出版商iData Research Inc.在2011年08月所出版的。
這份英文市場調查報告書包含107 Pages 價格從美金3995起跳。
2010年，日本成為亞太地區最大的牙科修補及CAD/CAM設備市場。該市場的販賣台數及市場銷售額皆為最大。雖然因為全球性經濟不景氣的影響，牙科修補市場的台數下滑，但到了2010年初以來，市場確實有復甦的走向。
本報告提供日本的牙科修補及CAD/CAM設備市場收益，到2017年為止的預測，以及平均售價，競爭趨勢，製造商市場佔有率，產品系列等，為您概述為以下內容。
目錄
圖表
第1章 摘要整理
第2章 調查方法
第3章 牙科修補的簡介
- 亞太地區牙科統計
- 牙冠．牙橋
- 牙冠
- 牙橋
- 金屬補綴物inlays
- 金屬補綴物onlays
- 瓷牙貼片
- 假牙
- 製造工程及技術開發
第4章 國家簡介
- 簡介
- 人口
- 平均年齡
- 平均每個人的GDP
- 平均1萬居民的牙冠．牙橋
- 價格內容
- 亞太地區平均一個人的牙科修補摘要
- 日本
- 各國家平均每個人的牙科醫生
第5章 日本的牙科修補及CAD/CAM設備市場
- 簡介
- 市場分析與預測
- 牙科修補整體市場
- 牙冠及牙橋市場
- CAD/CAM補綴市場
- 假牙市場
- CAD/CAM系統市場
- 促進因素與阻礙因素
- 競爭分析
- CAD/CAM區塊市場
簡稱
Abstract
In 2010, the Japanese market for dental prosthetic and CAD/CAM devices was the
largest in Asia-Pacific region. The market for dental prosthetics in Japan was
the largest in terms of both unit sales and market value in 2010. The dental
prosthetic market saw a drop in the number of units sold during the global
economic recession but has seen steady recovery since the beginning of 2010
The market segments covered in this report include:
- Crowns,
- Bridges,
- Inlays/Onlays,
- Veneers,
- Dentures,
- CAD/CAM System,
- CAD/CAM Prosthetics,
- CAD/CAM Blocks
Within the dental prosthetics and CAD/CAM market, companies such as Sirona,
Nobel Biocare, 3M Espe and Noritake lead the market, among many others. This
report provides a comprehensive and detailed analysis of market revenues by
device type, market forecasts through 2017, unit sales, average selling
prices, market drivers and limiters and a detailed competitive analysis,
including manufacturer market shares and product portfolios.
Table of Contents
TABLE OF CONTENTS
LIST OF FIGURES
LIST OF CHARTS
EXECUTIVE SUMMARY
- 1.1 TOTAL ASIA-PACIFIC DENTAL PROSTHETICS AND CAD/CAM DEVICE MARKET
- 1.2 CAD/CAM PROSTHETICS MARKET
- 1.3 CAD/CAM BLOCK MARKET
- 1.4 TREND ANALYSIS BY COUNTRY
- 1.5 TREND ANALYSIS BY SEGMENT
- 1.6 DENTURE MARKET
- 1.7 CAD/CAM SYSTEM MARKET
- 1.8 COMPETITIVE ANALYSIS
RESEARCH METHODOLOGY
- 2.1 RESEARCH SCOPE
- 2.2 IDATA' S 9-STEP METHODOLOGY
- Step 1: Project Initiation & Team Selection
- Step 2: Prepare Data Systems and Perform Secondary Research
- Step 3: Preparation for Interviews & Questionnaire Design
- Step 4: Performing Primary Research
- Step 5: Research Analysis: Establishing Baseline Estimates
- Step 6: Market Forecast and Analysis
- Step 7: Identify Strategic Opportunities
- Step 8: Final Review and Market Release
- Step 9: Customer Feedback and Market Monitoring
INTRODUCTION TO DENTAL PROSTHETICS
- 3.1 DENTAL HEALTH STATISTICS IN ASIA-PACIFIC
- 3.2 CROWNS AND BRIDGES
- 3.2.1 Crowns
- 3.2.2 Bridges
- 3.2.3 Inlays/Onlays
- 3.2.4 Veneers
- 3.2.5 Dentures
- 3.2.5.1 Full Dentures
- 3.2.5.2 Partial Dentures
- 3.2.6 Manufacturing Process and Technological Developments
- 3.2.6.1 Conventional Fabrication.
- 3.2.6.2 CAD/CAM Technology
- 3.2.6.3 Rapid Prototyping
- 3.2.6.4 Intra-Oral Digital Impression-Taking
COUNTRY PROFILES
- 4.1 INTRODUCTION
- 4.1.1 Population
- 4.1.2 Median Age
- 4.1.3 GDP per Capita
- 4.1.4 Crowns and Bridges Placed Per 10,000 Inhabitants
- 4.1.5 Price Index
- 4.2 ASIA-PACIFIC DENTAL PROSTHETICS PER CAPITA SUMMARY
- 4.3 JAPAN
- 4.4 DENTISTS PER POPULATION
JAPANESE DENTAL PROSTHETIC AND CAD/CAM DEVICE MARKET
- 5.1 INTRODUCTION
- 5.2 MARKET ANALYSIS AND FORECAST
- 5.2.1 Dental Prosthetic Device Market
- 5.2.2 Crown and Bridge Market
- 5.2.2.1 Porcelain-Fused Metal (PFM) Device Market
- 5.2.2.2 Full-Cast Device Market
- 5.2.2.3 All-Ceramic Device Market
- 5.2.2.4 Hard-Resin Device Market
- 5.2.3 CAD/CAM Prosthetics Market
- 5.2.3.1 Chairside CAD/CAM Prosthetics Market
- 5.2.3.2 In-Lab CAD/CAM Prosthetics Market
- 5.2.4 Denture Market
- 5.2.4.1 Full Denture Market
- 5.2.4.2 Partial Denture Market
- 5.2.5 CAD/CAM System Market
- 5.2.5.1 Full In-Lab CAD/CAM System Market
- 5.2.5.2 Standalone Scanner CAD/CAM System Market
- 5.2.5.3 Chairside CAD/CAM System Market
- 5.3 MARKET DRIVERS AND LIMITERS
- 5.3.1 Total Dental Prosthetics Market
- 5.3.1.1 Market Drivers.
- 5.3.1.2 Market Limiters
- 5.3.2 Crown and Bridge Market
- 5.3.2.1 Market Drivers
- 5.3.2.2 Market Limiters
- 5.3.3 Denture Market
- 5.3.3.1 Market Drivers.
- 5.3.3.2 Market Limiters
- 5.3.4 CAD/CAM System Market
- 5.3.4.1 Market Drivers.
- 5.3.4.2 Market Limiters
- 5.4 COMPETITIVE ANALYSIS
- 5.4.1 CAD/CAM Prosthetics Market
- 5.4.1.1 In-Lab CAD/CAM Prosthetics Market
- 5.4.1.2 Chairside CAD/CAM Prosthetics Market
- 5.4.2 CAD/CAM System Market
- 5.4.2.1 Full In-Lab CAD/CAM System Market
- 5.4.2.2 Standalone Scanner CAD/CAM System Market
- 5.4.2.3 Chairside CAD/CAM System Market
- Sirona
- 5.5 CAD/CAM BLOCK MARKET
- 5.5.1 Market Overview
- 5.5.2 : CAD/CAM Block Market by Material Type
- 5.5.2.1 Zirconia
- 5.5.2.2 Porcelain
- 5.5.2.3 Acrylic
- 5.5.2.4 Metal.
ABBREVIATIONS
LIST OF FIGURES
EXECUTIVE SUMMARY
RESEARCH METHODOLOGY.
INTRODUCTION TO DENTAL PROSTHETICS
COUNTRY PROFILES
- Figure 5-1: Price Index, Asia-Pacific, 2010
- Figure 5-2: Country Indicators, Asia-Pacific, 2010
- Figure 5-3: Population per Dentist, Asia-Pacfic, 2010
JAPANESE DENTAL PROSTHETIC AND CAD/CAM DEVICE MARKET
- Figure 6-1: Total Dental Prosthetic Device Market, Japan, 2007 - 2017
(US$M)
- Figure 6-2: Total Dental Prosthetic Device Market, Japan, 2007 - 2017
(JP¥M)
- Figure 6-3: Crown and Bridge Market, Japan, 2007 - 2017 (US$)
- Figure 6-4: Crown and Bridge Market, Japan, 2007 - 2017 (JP¥)
- Figure 6-5: Crown and Bridge Units Sold by Material Type, Japan, 2007 -
2017
- Figure 6-6: PFM Device Market, Japan, 2007 - 2017 (US$)
- Figure 6-7: PFM Device Market, Japan, 2007 - 2017 (JP¥)
- Figure 6-8: Full-Cast Device Market, Japan, 2007 - 2017 (US$)
- Figure 6-9: Full-Cast Device Market, Japan, 2007 - 2017 (JP¥)
- Figure 6-10: All-Ceramic Device Market, Japan, 2007 - 2017 (US$)
- Figure 6-11: All-Ceramic Device Market, Japan, 2007 - 2017 (JP¥)
- Figure 6-12: Hard-Resin Device Market, Japan, 2007 - 2017 (US$)
- Figure 6-13: Hard-Resin Device Market, Japan, 2007 - 2017 (JP¥)
- Figure 6-14: CAD/CAM Prosthetics Market, Japan, 2007 - 2017 (US$)
- Figure 6-15: CAD/CAM Prosthetics Market, Japan, 2007 - 2017 (JP¥)
- Figure 6-16: Chairside CAD/CAM Prosthetics Market, Japan, 2007 - 2017 (US$)
- Figure 6-17: Chairside CAD/CAM Prosthetics Market, Japan, 2007 - 2017 (JP¥)
- Figure 6-18: In-Lab CAD/CAM Prosthetics Market, Japan, 2007 - 2017 (US$)
- Figure 6-19: In-Lab CAD/CAM Prosthetics Market, Japan, 2007 - 2017 (JP¥)
- Figure 6-20: Denture Market by Type, Japan, 2007 - 2017
- Figure 6-21: Denture Market, Japan, 2007 - 2017 (US$)
- Figure 6-22: Denture Market, Japan, 2007 - 2017 (JP¥)
- Figure 6-23: Denture Units by Type, Japan, 2007 - 2017
- Figure 6-24: CAD/CAM System Market, Japan, 2007 - 2017
- Figure 6-25: Full In-Lab CAD/CAM System Market, Japan, 2007 - 2017 (US$)
- Figure 6-26: Full In-Lab CAD/CAM System Market, Japan, 2007 - 2017 (JP¥)
- Figure 6-27: Standalone Scanner CAD/CAM System Market, Japan, 2007 - 2017
(US$)
- Figure 6-28: Standalone Scanner CAD/CAM System Market, Japan, 2007 - 2017
(JP¥)
- Figure 6-29: Chairside CAD/CAM System Market, Japan, 2007 - 2017 (US$)
- Figure 6-30: Chairside CAD/CAM System Market, Japan, 2007 - 2017 (JP¥)
- Figure 6-31: Drivers and Limiters, Total Dental Prosthetics Market, Japan,
2010
- Figure 6-32: Drivers and Limiters, Crown and Bridge Market, Japan, 2010
- Figure 6-33: Drivers and Limiters, Denture Market, Japan, 2010
- Figure 6-34: Drivers and Limiters, CAD/CAM System Market, Japan, 2010
- Figure 6-35: Leading Competitors, CAD/CAM Prosthetics Market, Japan, 2010
- Figure 6-36: Leading Competitors, CAD/CAM System Market, Japan, 2010
- Figure 6-37: Leading Competitors, Full In-Lab CAD/CAM System Market,
Japan, 2010
- Figure 6-38: Leading Competitors, Standalone Scanner CAD/CAM System
Market, Japan, 2010
- Figure 6-39: CAD/CAM Block Market, Japan, 2007 - 2017 (US$)
- Figure 6-40: CAD/CAM Block Market, Japan, 2007 - 2017 (JP¥)
- Figure 6-41: Units Sold by Material Type, CAD/CAM Block Market, Japan,
2007 - 2017
ABBREVIATIONS
LIST OF CHART S
EXECUTIVE SUMMARY
- Chart 1-1: Dental Prosthetics and CAD/CAM Device Market, Asia-Pacific,
2007 - 2017 (US$M)
- Chart 1-2: Percentage of Prosthetics Sold by CAD/CAM Technology versus
Conventional Methods, Asia-Pacific, 2007 - 2017
- Chart 1-3: CAD/CAM Block Unit Share by Material Type, Asia-Pacific, 2010
- Chart 1-4: Dental Prosthetics Market by Country, Asia-Pacific, 2010
- Chart 1-5: Growth Rates by Segment, Crown and Bridge Market, Asia-Pacific,
2007 - 2017
- Chart 1-6: Denture Market, Asia-Pacific, 2007 - 2017 (US$M)
- Chart 1-7: CAD/CAM System Market, Asia-Pacific, 2007 - 2017 (US$M)
- Chart 1-8: Leading Competitors, CAD/CAM System Market, Asia-Pacific, 2010
RESEARCH METHODOLOGY
INTRODUCTION TO DENTAL PROSTHETICS
COUNTRY PROFILES
- Chart 5-1: Country Statistics, Japan, 2010
JAPANESE DENTAL PROSTHETIC AND CAD/CAM DEVICE MARKET
- Chart 6-1: Total Dental Prosthetic Device Market, Japan, 2007 - 2017 (US$M)
- Chart 6-2: Crown and Bridge Market, Japan, 2007 - 2017 (US$M)
- Chart 6-3: Crown and Bridge Units Sold by Material Type, Japan, 2010
- Chart 6-4: Crown and Bridge Units Sold by Material Type, Japan, 2017
- Chart 6-5: Crown and Bridge Unit Share by Material Type, Japan, 2007 - 2017
- Chart 6-6: Denture Market, Japan, 2007 - 2017 (US$M)
- Chart 6-7: CAD/CAM System Market, Japan, 2007 - 2017 (US$M)
- Chart 6-8: Full In-Lab CAD/CAM System Market, Japan, 2007 - 2017 (US$M)
- Chart 6-9: Standalone Scanner CAD/CAM System Market, Japan, 2007 - 2017
(US$M)
- Chart 6-10: Chairside CAD/CAM System Market, Japan, 2007 - 2017 (US$M)
- Chart 6-11: Leading Competitors, CAD/CAM Prosthetics Market, Japan, 2010
- Chart 6-12: Leading Competitors, CAD/CAM System Market, Japan, 2010
- Chart 6-13: Leading Competitors, Full In-Lab CAD/CAM System Market, Japan,
2010
- Chart 6-14: Leading Competitors, Standalone Scanner CAD/CAM System Market,
Japan, 2010
- Chart 6-15: CAD/CAM Block Market, Japan, 2007 - 2017 (US$M)
- Chart 6-16: Units Sold by Material Type, CAD/CAM Block Market, Japan, 2007
- 2017
ABBREVIATIONS
|
