高效率太陽能電池生產用之最新鐳射應用技術 是由出版商DisplayBank在2008年10月所出版的。
這份英文市場調查報告書價格從美金5500起跳。
Abstract
The recent international oil price' s radical change makes international
economy insecure. At the same time, the serious global warming issue emerged
recently for the world to face a situation where it needs to take
responsibility in cutting greenhouse gas exhaust volume. Therefore, each
country pursued rapid photovoltaic development as alternative energy in order
to fundamentally resolve issues of fossil fuel dependency and its usage.
However, the rapid photovoltaic industry' s development caused to break supply
and demand balance of polysilicon which is the raw material for crystalline
silicon solar cell. The low cell conversion efficiency of solar cell resulted
in increase of installation cost that photovoltaic unit cost is three to four
times higher than other new renewable energies and six to ten times higher
than fossil fuel energy. Hence, it seems difficult to quickly supply
photovoltaic energy to the general public.
The conventional manufacturing process requires long R&D period to improve
cell conversion efficiency of crystalline solar cell. Thin film Si solar cell
can minimize silicon material that it receives lots of attention lately.
However, it entails issues of low cell efficiency, large-scale investment
requirement, and Si deposition process that companies appear to be hesitant to
enter thin film Si solar cell business.
Cell makers endeavor to develop technology to resolve such issues and enhance
cell efficiency by applying laser technology in the conventional process.
Manufacturing cost increases when laser method is applied compared to the
conventional method. Though, it largely increases cell efficiency that it is
gradually applied in PV industry. It is likely to be applied in all areas
including solar cell and module manufacturing process in the future.
Table of Contents
1. LASER TECHNOLOGY OVERVIEW
- 1.1 CHARACTERISTIC OF LASER
- 1.1.1 Definition and Characteristic of Laser
- 1.1.2 Oscillation Principle of Laser
- 1.2 ADVANCED LASER FOR PV PRODUCTION
- 1.2.1 Semi-Conductor Laser
- 1.2.2 Solid Laser
- 1.2.3 Gas Laser
- 1.2.4 Femto second Laser
- 1.3 BASIC COMPOSITION OF FPD LASER EQUIPMENT
- 1.3.1 Laser and Optical System
- 1.3.2 Laser Synthesis System Equipment
- 1.4 APPLICATION FIELD OF ADVANCED LASER
- 1.4.1 Electric/Electronic/Solar Cell Related Laser Application
- 1.4.2 FPD Related Laser Application
- 1.5 RECENT LASER TECHNOLOGY DEVELOPMENT TREND
2. PV MARKET FORECAST
- 2.1 GLOBAL PV MARKET TREND
- 2.1.1 Global PV Market
- 2.1.2 Thin Film Soar Cell Market
- 2.2 WAFER BASED SOLAR MODULE MANUFACTURING COST ANALYSIS
3. LASER APPLICATION TECHNOLOGY FOR HIGH EFFICIENCY WAFER BASED SOLAR CELL MANUFACTURING
- 3.1 WAFER BASED SOLAR CELL MANUFACTURING PROCESS
- 3.1.1 Wafer Based Solar Cell Type
- 3.1.2 Wafer Based Solar Cell Manufacturing Process
- 3.2 KEY LASER APPLICATION TECHNOLOGY
- 3.2.1 Laser Edge Isolation
- 3.2.2 Laser Grooved Buried Contact
- 3.2.3 Laser Fired Contact
- 3.2.4 Front-Surface ID marking
- 3.2.5 Laser Drilling for MWT (Metal Wrap Through) & EWT (Emitter Wrap
Through)
- 3.2.6 Laser Texturing
- 3.2.7 Laser Stringer Soldering
- 3.2.8 Crystalline Solar Cell Equipment Maker Trend
- 3.2.8.1 Centrotherm (Germany)
- 3.2.8.2 Schmid (Germany)
- 3.2.8.3 AMAT (Applied Materials)
- 3.3 LRD (LASER REACTIVE DEPOSITION)
- 3.3.1 LRD Technology
- 3.3.2 Equipment Maker Trend
- 3.3.2.1 Nanogram (U.S.)
- 3.3.2.2 Kornic System (Korea)
4. LASER APPLICATION TECHNOLOGY FOR HIGH EFFICIENCY THIN FILM SOLAR CELL PRODUCTION
- 4.1 THIN FILM SOLAR CELL MANUFACTURING PROCESS
- 4.1.1 Thin Film Solar Cell Type
- 4.1.2 Thin Film Solar Cell Manufacturing Process
- 4.2 KEY LASER APPLICATION TECHNOLOGY
- 4.2.1 P1 Laser Scribing for CIS and CdTe TFPV (Thin Film PhotoVoltaic)
- 4.2.2 P1/P2/P3 Laser Scribing for a-Si TFPV (Thin Film PhotoVoltaic)
- 4.2.3 Edge Deletion
- 4.2.4 Panel ID marking
- 4.2.5 PV Panel Laser Cutting
- 4.2.6 Thin Film Solar Cell Equipment and Panel Maker Trend
- 4.2.6.1 Oerlikon (Swiss)
- 4.2.6.2 AMAT (U.S.)
- 4.2.6.3 ULVAC (Japan)
- 4.2.6.4 JEL (Jusung Engineering Ltd.) (Korea)
- 4.2.6.5 Kaneka & See-Through PV Module Technology (Japan)
- 4.2.6.6 LTS (Laser Total Solution) (Korea)
- 4.2.6.7 EO Technics (Korea)
- 4.3 NEXT-GENERATION LRD (LASER REACTIVE DEPOSITION)
- 4.3.1 Next-Generation LRD Technology
- 4.3.2 Next-Generation Large-Area Thin Film Deposition LRD Technology
5. INDEX
