粉末冶金：各種技術與全球市場 是由出版商BCC Research在2010年09月所出版的。
這份英文市場調查報告書包含194 Pages 價格從美金4850起跳。
本報告書針對全球粉末冶金市場的現狀與預測進行調查分析，包括粉末冶金的材料與零件的市場規模實績/預測（∼2015年）、各地區的消費動態與影響市場的因素、冶金技術的概要、製造過程與應用，以及技術的發展動態與主要企業的簡介等，內容概要摘記如下。
第1章 導論
第2章 摘要
第3章 概要
- 至今的發展過程
- 粉末冶金的過程
- 金屬粉末的製造
- 粉末冶金的應用
第4章 產業結構
- 主要產業區分
- 粉末冶金產業中的主要企業
- 粉末冶金產業的特徵：2010年
- 粉末冶金的製造：地區別
- 粉末冶金產品的消費：地區別
- 市場領袖
- 企業簡介
第5章 技術
- 舊型粉末冶金
- 完全緻密（fully dense）處理
- 鐵金屬零件的高密度處理
- 二次加工
- 金屬粉末的製造與加工
- 技術發展
- 專利分析
第6章 產業的競爭力
- 嚴苛的經濟環境
- 產業/政府/業界團體的支援
- 規格
- 持續性的技術發展
- 市場成長因素
第7章 粉末冶金：市場概要
第8章 粉末冶金的材料與零件市場
- 鐵金屬
- 鋁粉末與零件
- 銅粉與銅基零件
- 鎳基粉末與零件
- 鎢/碳化鎢/鉬粉末與合金粉末的冶金零件市場
- 錫粉/錫基零件
- 粒狀物質/其他材料
- 全球粉體與零件的成長
- 全球工業元件市場
Abstract
HIGHLIGHTS
- BCC projects that value of powder shipments will resume growth in 2010 at
a 3.9% compound annual growth rate (CAGR), from $4.6 billion in 2009 to $4.7
billion in 2010. From 2010 to 2015, this segment will increase at a 6.8%
compound annual growth rate (CAGR) to a value of $6.6 billion.
- The part base will grow from a low of nearly $9.7 billion in 2009 to more
than $10 billion in 2010. From 2010 to 2015 this segment will increase at a
6.8% compound annual growth rate (CAGR) to reach a value of $13.9 billion in
2015.
- Individual powders and parts will also pick up in 2010. Iron and steel
powders will grow at a 3.5% compound annual growth rate (CAGR) and parts made
from them will also rise by 3.5%. Through 2015, we expect to see iron and
steel powder growth of 5.1% CAGR as the auto and other industries resume
higher growth rates.
STUDY GOAL OBJECTIVES
The objective of this study is to present an analysis of the global powder
metallurgy market. Our goal was to determine the current status of powder
metallurgy (PM) industry and assess its growth potential over the period from
2009 to 2010 and then over the 5 year period from 2010 to 2015. We were
particularly interested in the status of the industry in relation to the
global economic crisis and recession, and the impact these events had on PM
product demand.
Our major objective is to present a comprehensive analysis of the current
powder metallurgy industry and project its future course.
REASONS FOR DOING THE STUDY
Powder metallurgy (PM) has been a steady industry over the past several
decades, growing from the 1980s. Much of its growth derived from metal
powder-based parts replacing castings, forgings and machined parts. The
industry has consistently demonstrated that it could meet the demand of
manufacturers at a lower cost than previous technologies. More than 72% of all
PM parts have historically been sold to the automotive industry.
We have examined the current position of PM technologies and materials in 10
major powder groups. We were interested in the materials proposed to meet the
demand for more sophisticated products. We also analyzed the decline in PM
demand within particular industries caused by the economic downturn.
PM could eventually become an industry with saturated markets and grow largely
by acquisition or increasing market share. But PM technology is still
evolving, and the industry has adapted particulates (or powders and materials
that are not made solely of metals). Products are changing, too, and PM can be
adapted or modified to meet their demands. PM can expand and resume growth,
which is an important reason to do this study.
SCOPE OF REPORT
This study includes companies who manufacture powder metal and other related
materials used in the process, such as ceramics and nanopowders, special
alloys and metal matrix composites. It also includes companies that make parts
and components for automotive products, industrial and tolling equipment,
recreation and hobby items, appliances, business machines and other products.
BCC Research analyzes the PM industry on a global basis, including
manufacturing capability and consumption by regional markets. We also look at
industry standards, government and industry support, and other key factors
related to the success of powder metallurgy.
Market drivers within the industry are identified. The quantity and value of
various powders and parts shipments is projected from 2009 to 2010 and then
over a 5 year period from 2010 to 2015. Technological issues and trends are
projected and other influential factors are discussed.
Because this is a global study, BCC Research analyzes domestic and
international technological issues and economic considerations.
METHODOLOGY
Both primary and secondary research methodologies were used in preparing this
study. BCC Research presents an analysis for each type of powder used and the
parts made from them. We look at properties, advantages, demand factors,
competition, and other information. Estimated value is what manufacturers and
material providers have paid in current dollars. Then, based on our surveys,
we analyze industry growth in relation to the demand for and growth of PM
technology.
INFORMATION SOURCES
BCC Research interviewed approximately 125 companies to obtain data for this
study. Included were chemists, process equipment specialists, marketing
executives, operations personnel, and users of various powder metal parts.
Participants included representatives of the automotive industry, tooling
companies and industrial buyers. Additional data were obtained from government
information, trade associations, industry and financial sources and an
exhaustive review of technical literature.
ANALYST' S CREDENTIALS
After a successful career at IBM, Robert H. Moran has written extensively as a
research analyst and editor at BCC Research. The topics of his reports include
various deposition technologies, displays, solar energy and solid-state
lighting. Mr. Moran has been writing for BCC Research for more than 20 years.
He earned a B.S. degree in Economics from the University of Pennsylvania.
Table of Contents
Powder Metallurgy: Technologies and Global Markets
Chapter- 1: INTRODUCTION -- Complimentary
- STUDY GOAL OBJECTIVES
- REASONS FOR DOING THE STUDY
- INTENDED AUDIENCE
- SCOPE OF REPORT
- METHODOLOGY
- INFORMATION SOURCES
- ANALYST' S CREDENTIALS
- RELATED BCC REPORTS
- BCC ONLINE SERVICES
- DISCLAIMER
Chapter-2: SUMMARY
- SUMMARY
- SUMMARY TABLE GLOBAL PARTS AND POWDER SHIPMENTS THROUGH 2015 (MILLIONS)
- SUMMARY FIGURE GLOBAL PARTS AND POWDERS SHIPMENTS, 2009-2015 ($ MILLIONS)
Chapter-3: OVERVIEW
- HISTORY
- RECENT PM INDUSTRY ACTIVITY
- THE PM PROCESS
- TABLE 1. OVERVIEW OF THE PM PROCESS
- MAKING METAL POWDERS
- TABLE 2. BASIC POWDER MANUFACTURING PROCESSES
- PARTICULATE MATERIALS
- PM APPLICATIONS
- TABLE 3. END PRODUCTS THAT USE PM PARTS
Chapter-4: INDUSTRY STRUCTURE
- MAJOR INDUSTRY SEGMENTS
- TABLE 4. STRUCTURE OF THE WORLDWIDE PM INDUSTRY, 2009
- KEY COMPANIES IN THE PM INDUSTRY
- TABLE 5. KEY COMPANIES IN THE WORLDWIDE PM INDUSTRY
- TABLE 5. (CONTINUED)
- TABLE 5. (CONTINUED)
- CHARACTERISTICS OF THE PM INDUSTRY IN 2010
- CHARACTERISTICS OF THE ... (CONTINUED)
- PM MANUFACTURING BY REGION
- TABLE 6. GLOBAL SHARE OF PM MANUFACTURING BY REGION, 2009-2015 (%)
- FIGURE 1. GLOBAL SHARE OF PM MANUFACTURING BY REGION, 2009-2015 (%)
- CONSUMPTION OF PM PRODUCTS BY REGION
- TABLE 7. GLOBAL SHARE OF PM PRODUCT REVENUE BY REGION, 2009-2015 (%)
- FIGURE 2. GLOBAL SHARE OF PM PRODUCT REVENUE BY REGION, 2009-2015 (%)
- TRADITIONAL CONSUMER MARKETS REMAIN STRONG
- MARKET LEADERS
- LEADING PARTS AND COMPONENT FABRICATORS
- TABLE 8. TOP 30% OF PM COMPONENTS IN THE FABRICATION MARKET ($ MILLIONS)
- LEADING POWDER PRODUCERS
- TABLE 9. TOP 25% OF POWDER MAKERS IN THE PM INDUSTRY ($ MILLIONS)
- COMPANY PROFILES
- ACUPOWDER INTERNATIONAL, UNION, NJ
- ADVANCED MATERIALS TECHNOLOGIES PTE LTD., SINGAPORE
- ADVANCED METALWORKING PRACTICES, CARMEL, IN
- ALPHA SINTERED METAL INC., RIDGWAY, PA
- BASF, LUDWIGSHAFEN, GERMANY
- BORGWARNER INC., AUBURN HILLS, MI
- CAPSTAN, CARSON, CA
- CARPENTER TECHNOLOGY CORPORATION, WYOMISSING, PA
- CHICAGO POWDER METAL PRODUCTS, SHILLER PARK, IL
- DORST TECHNOLOGIES, KOCHEL, GERMANY
- FEDERAL-MOGUL CORP., SOUTHFIELD, MI
- FUKUDA METAL FOIL AND POWDER CO. LTD., KYOTO, JAPAN
- GKN SINTER METALS, AUBURN HILLS, MI
- GKN Sinter Metals, ... (Continued)
- HAWK CORPORATION, CLEVELAND, OH
- H.C. STARCK, GOSLAR, GERMANY
- HITACHI POWDERED METALS CO. LTD., CHIBA, JAPAN
- HOEGANAES CORPORATION, (SUBSIDIARY OF GKN SINTER METALS) CINNAMINSON, NJ
- HOGANAS CORPORATION AB, HOGANAS, SWEDEN
- KENNAMETAL INC., LATROBE, PA
- MAXTECH POWDER METAL, QUEBEC, CANADA
- METAL POWDER PRODUCTS COMPANY, WESTFIELD, IN
- Metal Powder Products ... (Continued)
- MIBA AG, VORCHDORF, AUSTRIA
- NIPPON KAGAKU YAKIN COMPANY, LTD., NEYAGAWA, JAPAN
- NIPPON PISTON RING CO. LTD., SAITAMA CITY, JAPAN
- OBE GMBH, ISPRINGEN, GERMANY
- RAINBOW MING, TAIWAN
- STACKPOLE LIMITED, ONTARIO, CANADA
- Stackpole Limited ... (Continued)
Chapter-5: TECHNOLOGY
- CONVENTIONAL POWDER METALLURGY
- POWDER MIXING
- COMPACTING
- Single Action Pressing
- Multiaction Pressing
- Double Die Pressing
- TABLE 11. CLASSIFICATION OF PARTS BY COMPLEXITY, THICKNESS AND PRESSING METHOD
- SINTERING
- TABLE 12. CONTINUOUS SINTERING FURNACES, BY TYPE
- Sinter Hardening
- FULLY DENSE PROCESSING
- HOT ISOSTATIC PRESSING (HIP)
- TABLE 13. THE BASIC HIP PROCESS
- COLD ISOSTATIC PRESSING (CIP)
- TABLE 14. THE BASIC CIP PROCESS
- ROLL COMPACTION
- HOT EXTRUSION
- METAL INJECTION MOLDING
- TABLE 15. THE BASIC MIM PROCESS
- Powder Injection Molding
- HIGH DENSITY PROCESSING OF FERROUS METAL PARTS
- IMPACT OF RAW MATERIALS
- DIE WALL LUBRICATION
- HIGH TEMPERATURE SINTERING
- WARM COMPACTION
- TABLE 16. THE WARM COMPACTING PROCESS
- POWDER FORGING
- SECONDARY OPERATIONS
- TABLE 17. SECONDARY OPERATIONS
- COINING AND SIZING
- IMPREGNATION
- INFILTRATION
- HEAT TREATING
- MACHINING
- FINISHING
- METAL POWDER PRODUCTION AND PROCESSING
- FERROUS POWDERS PRODUCTION
- Atomization
- TABLE 18. COMPARIONS OF WATER AND GAS ATOMIZATION PROCESSES
- Reduction of Oxides
- Electrolytic Deposition
- OTHER POWDER PROCESSING OPERATIONS
- Diffusion Bonding
- Segregation-Free Processing
- NONFERROUS POWDER PRODUCTION
- Aluminum-Based Powders
- Air or Inert Gas Atomization
- Ball Milling
- Copper-Based Powders
- Oxide Reduction
- Water or Air Atomization
- Nickel-Based Powders
- Hydrometallurgical Processing
- Gas Atomization
- Plasma Rotating Electrode Process
- Titanium-Based Powders
- Kroll Process
- Plasma Quench Processing
- Refractory Metal Powders
- TECHNOLOGICAL DEVELOPMENTS
- R&D IN THE ECONOMIC DOWNTURN
- EXPANDING DEFINITION OF PM MATERIALS
- TABLE 19. EXAMPLES OF PARTICULATE MATERIALS
- IMPACT OF PARTICULATES ON INDUSTRY EXPANSION
- The Materials Mix
- Benefits to the Industry
- TABLE 20. BENEFITS OF ADDED MATERIALS TO THE PM INDUSTRY
- Make or Outsource Materials
- Modifications of Component Manufacture
- ADVANCES IN MATERIALS AND PRODUCTION TECHNOLOGY
- Other Injection Molding Processes
- ADVANCED CERAMIC POWDERS
- Powder Types
- TABLE 21. COMMONLY USED ADVANCED CERAMIC MATERIALS
- Powder Synthesis Techniques
- NANO CERAMIC POWDERS
- Nanocomposite Ceramic Powder
- Nanoceramic Applications
- TABLE 22. RANGE OF COMMERCIAL APPLICATIONS FOR CERAMIC NANOPOWDERS
- CONCLUSION
- PATENT ANALYSIS
- PATENTS BY SUBJECT MATTER
- TABLE 23. PATENTS BY AREA OF PM TECHNOLOGY
- PATENTS BY REGION
- TABLE 24. PM PATENTS BY REGION
- PATENTS BY COMPANIES
- TABLE 25. COMPANIES THAT WERE AWARDED TWO OR MORE PATENTS
- SAMPLE ABSTRACTS
- Method of Using a Feedstock Composition for Powder Metallurgy
- Powder Metallurgical Compositions Containing Organometallic Lubricants
- Powder Metallurgy Sputtering Targets and Their Production Methods
- Making Sinter Forged, High-Strength Aluminum Parts
- Method for Making a Forged, Carburized Powder Metal Part
- Making a Turbine Blisk
Chapter-6: INDUSTRY COMPETITIVENESS
- A CHALLENGING ECONOMIC ENVIRONMENT
- ESTABLISHING A MARKET BASE
- Declining Powder Metal Shipments
- TABLE 26. GLOBAL POWDER METAL SHIPMENTS BY TYPE OF MATERIAL THROUGH 2009 (SHORT TONS)
- Falling Automotive Production
- TABLE 27. PRODUCTION OF VEHICLES IN NORTH AMERICA (MILLION UNITS)
- Impact on the Powder Metal Industry
- What Industry and Economists Think
- Long Term Look at the Economy and Powder Metal Products
- TABLE 28. ECONOMIC ASSUMPTIONS FOR THE GROWTH OF THE POWDER METAL INDUSTRY
- INDUSTRY, GOVERNMENT AND TRADE SUPPORT
- NORTH AMERICA
- The Metal Powder Industries Federation
- TABLE 29. TRADE ASSOCIATIONS IN THE MPIF FEDERATION
- Penn State Center for Innovative Sintered Products (CISP)
- TABLE 30. CISP COLLABORATIVE UNIVERSITIES
- EUROPE
- The European Powder Metal Association
- TABLE 31. KEY GOALS OF THE EPMA
- ASIA-PACIFIC
- Japan Powder Metallurgy Association
- The Powder Metallurgy Association of India
- TABLE 32. MAJOR OBJECTIVES OF THE PMAI
- OTHER REGIONS
- CONCLUSION
- STANDARDS
- METHODS OF TEST
- POWDER PRESS SAFETY STANDARDS
- OTHER STANDARDS
- CONTINUED TECHNOLOGICAL DEVELOPMENT
- MARKET GROWTH FACTORS
- IMPACT OF THESE GROWTH FACTORS
- TABLE 33. IMPACT OF CONTRIBUTING FACTORS ON GLOBAL PM INDUSTRY GROWTH (%)
- Impact of These Growth Factors (Continued)
Chapter-7: PM MARKET OVERVIEW
- MARKET PERSPECTIVE
- POWDER MATERIALS
- TABLE 34. ESTIMATED GLOBAL POWDER METAL SHIPMENTS AND MARKET SHARE BY TYPE OF MATERIAL, 2009 (SHORT TONS AND % SHARE)
- FIGURE 3. GLOBAL POWDER METAL SHIPMENTS BY TYPE OF MATERIAL, 2009 (SHORT TONS)
- FIGURE 4. GLOBAL POWDER METAL MARKET SHARE BY TYPE OF MATERIAL, 2009 (%)
- COMPONENT MARKETS
- TABLE 35. GLOBAL PM COMPONENTS MARKET, 2009 (% SHARE AND $ MILLIONS)
- FIGURE 5. GLOBAL PM COMPONENT MARKETS, 2009 ($ MILLIONS)
- FIGURE 6. GLOBAL PM COMPONENT MARKETS, 2009 (%)
- PM MARKET APPROACH
- MEASUREMENT OBJECTIVES
- Measurement Objectives (Continued)
Chapter-8: PM MATERIALS AND PARTS MARKETS
- FERROUS METALS AND PARTS
- STATUS OF THE AUTOMOBILE INDUSTRY
- TABLE 36. OVERVIEW OF THE GLOBAL AUTOMOTIVE INDUSTRY, 2009
- What' s Next?
- Impact of PM on Automobiles
- TABLE 37. IMPACT OF PM ON THE AUTOMOTIVE INDUSTRY
- METAL POWDER CHARACTERISTICS AND PROPERTIES
- Metal Powder Properties
- Particle Size and Distribution
- TABLE 38. STANDARD U.S. SIEVE SIZES
- Apparent or Tap Density
- Flow Rate
- TABLE 39. SAMPLE PHYSICAL CHARACTERISTICS OF COMMERCIAL IRON-BASED POWDERS
- Ferrous Powder Types
- TABLE 40. SAMPLE COMPOSITION OF SINTERED AUTOMOTIVE STEELSTRUCTURAL COMPONENT MATERIALS
- Other Materials
- AUTOMOTIVE APPLICATIONS (PARTS) MADE BY PM
- Ferrous Structural Automotive Parts
- Engine Connecting Rods
- Engine Main Bearing Caps
- Camshaft Lobes
- Exhaust System Flanges
- Bearings, Gears and Sprockets
- Transmission Components
- Torque Converter Turbine Hubs
- Valve Guides and Valve Seat Inserts
- Steering Systems
- Braking Systems
- Ferrous Self-Lubricating Bearings
- Ferrous Magnetic Parts
- TABLE 41. SAMPLE AUTOMOTIVE APPLICATIONS FOR PM PARTS
- Ferrous Friction Materials
- NON-AUTOMOTIVE MARKETS FOR FERROUS PARTS
- ADVANTAGES OF PM IN THE AUTOMOTIVE BUSINESS
- TABLE 42. ADVANTAGES OF PM IN THE AUTOMOTIVE BUSINESS
- FUTURE AUTOMOTIVE MARKET ANALYSIS
- Global Economic Conditions Impacting the Automotive Industry
- TABLE 43. GLOBAL ECONOMIC PRESSURES THAT COULD WEAKEN THE AUTO INDUSTRY
- Housing Problems
- Continued Global Unemployment
- Double Dip Recession
- Continued European Economic and Euro Problems
- Energy Policy, Fuel Prices
- Economic Unrest in Asia or Other Regions
- Positive Economic Aspects
- TABLE 44. POSITIVE ECONOMIC ASPECTS OF THE GLOBAL AUTO AND PM BUSINESSES
- PM AUTO MARKET ASSESSMENT
- TABLE 45. GLOBAL SHIPMENTS OF IRON AND STEEL POWDERS THROUGH 2009 (SHORT TONS)
- Growth of Other Powders
- PM Market Drivers
- Some Limitations
- FORECAST ASSUMPTIONS - IRON AND STEEL POWDERS AND PARTS
- TABLE 46. FORECAST ASSUMPTIONS - GROWTH OF IRON AND STEEL POWDERS AND PARTS
- FORECAST - GROWTH OF IRON AND STEEL POWDERS AND PARTS
- TABLE 47. GLOBAL SHIPMENTS OF IRON AND STEEL POWDERS AND PARTS, THROUGH 2015 (POUNDS MILLIONS)
- FORECAST - VALUE OF IRON AND STEEL POWDERS, PARTS SHIPMENTS
- Price Considerations
- TABLE 48. GLOBAL VALUE OF IRON AND STEEL POWDERS AND PARTS SHIPMENTS, THROUGH 2015 ($ MILLIONS)
- FIGURE 7. VALUE OF GLOBAL IRON AND STEEL POWDERS AND PARTS SHIPMENTS, 2009-2015 ($ MILLIONS)
- STAINLESS STEEL
- TABLE 49. MAJOR APPLICATIONS FOR STAINLESS STEEL POWDERS
- FORECAST - GROWTH OF STAINLESS STEEL POWDERS AND PARTS
- TABLE 50. GLOBAL SHIPMENTS OF STAINLESS STEEL POWDERS AND PARTS, THROUGH 2015 (POUNDS MILLIONS)
- FORECAST - VALUE OF STAINLESS STEEL POWDERS, PARTS SHIPMENTS
- TABLE 51. GLOBAL VALUE OF STAINLESS STEEL POWDERS AND PARTS SHIPMENTS, THROUGH 2015 ($ MILLIONS)
- FIGURE 8. VALUE OF GLOBAL SHIPMENTS OF STAINLESS STEEL POWDERS AND PARTS, 2009-2015 ($ MILLIONS)
- COMMENTS - FERROUS METAL POWDERS
- ALUMINUM POWDERS AND PARTS
- ALUMINUM POWDER AND PARTS PROPERTIES
- ADVANTAGES OF ALUMINUM PM
- TABLE 52. ADVANTAGES OF ALUMINUM PM
- The Search for Weight Reduction
- Density is a Positive Factor
- ALUMINUM POWDER PARTS MADE BY PM
- Aluminum as a Replacement Part
- Cam Shaft Bearing Caps
- Aerospace Applications
- Metal Matrix Composites
- TABLE 53. MMC MANUFACTURING METHODS
- Thermal Management Applications
- Other Applications
- ALUMINUM POWDER AND PARTS MARKET ASSESSMENT
- FORECAST ASSUMPTIONS - ALUMINUM POWDER AND PARTS
- TABLE 54. FORECAST ASSUMPTIONS - GROWTH OF ALUMINUM POWDER
- FORECAST - GROWTH OF ALUMINUM POWDERS AND PARTS
- TABLE 55. GLOBAL SHIPMENTS OF ALUMINUM POWDER AND PARTS, THROUGH 2015 (POUNDS MILLIONS)
- FORECAST - VALUE OF ALUMINUM POWDER AND PARTS SHIPMENTS
- TABLE 56. GLOBAL VALUE OF ALUMINUM POWDERS AND PARTS SHIPMENTS, THROUGH 2015 ($ MILLIONS)
- FIGURE 9. GLOBAL VALUE OF ALUMINUM POWDERS AND PARTS SHIPMENTS, 2009-2015 ($ MILLIONS)
- COMMENTS - ALUMINUM POWDERS
- COPPER POWDERS AND COPPER-BASE PARTS
- ADVANTAGES OF COPPER POWDER
- TABLE 57. PRIMARY ADVANTAGES OF COPPER POWDER
- APPLICATIONS FOR COPPER PM PARTS
- TABLE 58. KEY AUTO APPLICATIONS FOR COPPER POWDER PARTS
- Hybrid Vehicles
- Bronze Bearings, Filters and Related Parts
- High Conductivity Structural Parts
- Other Copper PM Applications
- Friction Materials
- COPPER POWDER AND PARTS MARKET ASSESSMENT
- Changes in Demand
- FORECAST ASSUMPTIONS - COPPER POWDER AND PARTS
- TABLE 59. FORECAST ASSUMPTIONS - GROWTH OF COPPER AND COPPER-BASE POWDER AND PARTS
- FORECAST - GROWTH OF COPPER POWDERS AND PARTS
- TABLE 60. GLOBAL SHIPMENTS OF COPPER POWDERS AND PARTS THROUGH 2015 (POUNDS MILLIONS)
- FORECAST - VALUE OF COPPER POWDERS, PARTS SHIPMENTS
- Price Considerations
- TABLE 61. GLOBAL VALUE OF COPPER POWDER AND PARTS SHIPMENTS THROUGH 2015 ($ MILLIONS)
- FIGURE 10. GLOBAL VALUE OF COPPER POWDERS AND PARTS SHIPMENTS, 2009-2015 ($ MILLIONS)
- NICKEL-BASED POWDERS AND PARTS
- NICKEL POWDER PROPERTIES
- TABLE 62. PROPERTIES OF NICKEL POWDER
- NICKEL POWDER APPLICATIONS
- TABLE 63. OVERVIEW OF NICKEL POWDER APPLICATIONS BY POWDER TYPE
- NICKEL POWDER AND PARTS MARKET ASSESSMENT
- Nickel Powder Demand Pattern
- FORECAST ASSUMPTIONS - NICKEL POWDER AND PARTS
- TABLE 64. FORECAST ASSUMPTIONS - GROWTH OF NICKEL POWDERS AND PARTS
- FORECAST - GROWTH OF NICKEL POWDERS AND PARTS
- TABLE 65. GLOBAL SHIPMENTS OF NICKEL POWDERS AND PARTS, THROUGH 2015 (POUNDS MILLIONS)
- FORECAST - VALUE OF NICKEL POWDER, PARTS SHIPMENTS
- Price Considerations
- TABLE 66. GLOBAL VALUE OF NICKEL POWDER AND PARTS SHIPMENTS, THROUGH 2015 ($ MILLIONS)
- FIGURE 11. GLOBAL VALUE OF NICKEL POWDERS AND PARTS SHIPMENTS 2009-2015 ($ MILLIONS)
- MARKETS FOR TUNGSTEN, TUNGSTEN CARBIDE, AND MOLYBDENUM POWDERS AND ALLOY
PM PARTS
- USES OF TUNGSTEN PRODUCTS
- TABLE 67. REPORTED CONSUMPTION OF TUNGSTEN STOCKS AND PRODUCTS, 2009 (%)
- APPLICATIONS FOR TUNGSTEN PRODUCTS
- Tungsten-Base
- Other Markets
- Tungsten Carbide Powders
- TABLE 68. OVERVIEW OF POWDER PRODUCTS IN THE CUTTING TOOL INDUSTRY
- Molybdenum-Base
- TUNGSTEN AND MOLYBDENUM POWDER AND PARTS MARKET ASSESSMENT
- Tungsten Materials
- Molybdenum
- TABLE 69. FORECAST ASSUMPTIONS - GROWTH OF TUNGSTEN-BASED AND MOLYBDENUM POWDERS AND PARTS
- FORECAST - GROWTH OF TUNGSTEN AND MOLYBDENUM POWDERS AND PARTS
- TABLE 70. GLOBAL SHIPMENTS OF TUNGSTEN AND MOLYBDENUM POWDERS AND PARTS, THROUGH 2015 (POUNDS MILLIONS)
- FORECAST - VALUE OF TUNGSTEN AND MOLYBDENUM POWDER AND PARTS SHIPMENTS
- Price Uncertainty
- TABLE 71. VALUE OF GLOBAL SHIPMENTS OF TUNGSTEN AND MOLYBDENUM POWDERS AND PARTS, THROUGH 2015 ($ MILLIONS)
- FIGURE 12. VALUE OF WORLDWIDE SHIPMENTS OF TUNGSTEN AND MOLYBDENUM POWDERS AND PARTS 2009-2015 ($ MILLIONS)
- TIN POWDERS AND TIN-BASE PARTS
- PROPERTIES
- APPLICATIONS
- TABLE 72. MAJOR APPLICATIONS OF TIN POWDERS
- FORECAST ASSUMPTIONS
- TABLE 73. FORECAST ASSUMPTIONS - GROWTH OF TIN POWDERS AND PARTS
- FORECAST - GROWTH OF TIN POWDERS AND PARTS
- TABLE 74. GLOBAL SHIPMENTS OF TIN POWDERS AND PARTS, THROUGH 2015 (POUNDS MILLIONS)
- FORECAST - VALUE OF TIN POWDER AND PARTS SHIPMENTS
- TABLE 75. VALUE OF GLOBAL SHIPMENTS OF TIN POWDERS AND PARTS, THROUGH 2015 ($ MILLIONS)
- FIGURE 13. VALUE OF GLOBAL SHIPMENTS OF TIN POWDERS AND PARTS, THROUGH 2015 ($ MILLIONS)
- PARTICULATES AND OTHER MATERIALS
- DIFFERING OPINIONS
- What We Include
- FABRICATION OF SPECIAL ALLOY MATERIALS
- Special Process
- TABLE 76. BASIC MICRO-MELT ALLOY PRODUCTION STEPS
- Higher Carbon Content
- TABLE 77. ALLOY WITH HIGHER CARBON CONTENT
- EXAMPLES OF CERAMIC POWDERS
- Properties
- EXAMPLES OF NANOCERAMIC POWDERS
- Synthesis of Nanopowders
- TABLE 78. METHODS OF MAKING NANOPOWDERS
- APPLICATIONS
- TABLE 79. MAJOR APPLICATIONS FOR PARTICULATE AND OTHER MATERIALS
- LEVEL OF ACTIVITY
- Key Ceramic Powder Markets
- TABLE 80. RANKING OF MARKETS FOR PARTICULATES AND SPECIAL POWDERS (%)
- FORECAST ASSUMPTIONS
- TABLE 81. FORECAST ASSUMPTIONS - GROWTH OF PARTICULATES AND OTHER MATERIALS
- FORECAST - GROWTH OF PARTICULATES AND OTHER MATERIALS
- TABLE 82. GLOBAL SHIPMENTS OF PARTICULATE POWDERS AND PARTS, THROUGH 2015 (MILLION POUNDS)
- FORECAST - VALUE OF PARTICULATE POWDER AND PARTS SHIPMENTS
- Price Considerations
- TABLE 83. GLOBAL VALUE OF PARTICULATES AND PARTS SHIPMENTS, THROUGH 2015 ($ MILLIONS)
- FIGURE 14. GLOBAL VALUE OF PARTICULATE AND OTHER POWDERS AND PARTS THROUGH 2015
- Long Term Impact of Particulates
- GLOBAL POWDER AND PARTS GROWTH
- TABLE 84. ESTIMATED GLOBAL POWDER SHIPMENTS AND MARKET SHARE BY TYPE OF MATERIAL, THROUGH 2015 (SHORT TONS AND % MARKET SHARE)
- FIGURE 15. GLOBAL SHIPMENTS OF POWDER MATERIALS BY TYPE OF MATERIAL, 2009-2015 (SHORT TONS)
- FIGURE 16. GLOBAL MARKET SHARE OF POWDER MATERIALS BY TYPE OF MATERIAL, 2009-2015 (%)
- DETAILED GLOBAL POWDER SHIPMENTS
- TABLE 85. GLOBAL SHIPMENTS OF POWDERS, THROUGH 2015 (MILLION LBS./$ MILLIONS)
- DETAILED GLOBAL SHIPMENTS OF PARTS
- TABLE 86. GLOBAL SHIPMENTS OF PM PARTS, THROUGH 2015 (MILLION LBS/$ MILLIONS)
- GLOBAL INDUSTRY COMPONENT MARKETS
- TABLE 87. ESTIMATED GLOBAL PM COMPONENT SHIPMENTS AND SHARE BY TYPE OF MARKET, THROUGH 2015 ($ MILLIONS AND % MARKET SHARE)
- FIGURE 17. ESTIMATED GLOBAL PM COMPONENT SHIPMENTS BY TYPE OF MARKET, 2009-2015 ($ MILLIONS)
- FIGURE 18. ESTIMATED GLOBAL PM COMPONENT SHARE BY TYPE OF MARKET, 2009-2015 (%)
|
